| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Wheel bearing or whole hub assembly thing?? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=47355 |
Page 1 of 1 |
| Author: | weston02kj [ Thu Oct 22, 2009 3:04 pm ] |
| Post subject: | Wheel bearing or whole hub assembly thing?? |
Hey guys. a couple months ago when i got my jeep aligned the guy said my wheel bearings were on their way out.. and after i took my 1.5" wheel spacers off and put my KK clevis on (sitting at 22.75") now every time I turn left there's a strong pop noise.. and now driving like that for a couple days you can kind of hear it when i turn right.. it also doesn't feel right going over speed bumps. could i just get new bearings? or do i really need to buy all new hubs? $25 in parts is a whole heck of alot better for me than $350 in parts.. LMK what ya think please Thanks, Chase |
|
| Author: | tjkj2002 [ Thu Oct 22, 2009 6:25 pm ] |
| Post subject: | |
The KJ uses a non-serviceable unit bearing(as does 99% of all new vehicles made today),you have to buy the whole unit as you can not just replace the bearings themselfs let alone grease them. |
|
| Author: | Tokyojoe [ Sun Dec 06, 2009 3:58 pm ] |
| Post subject: | |
QUESTION: I noticed a company selling a left and a right wheel bearing hub assembly (Timken). Is there such a thing as left and right? Another place I checked sells the Timken's but don't say anything about left and right. My guess is there is no difference. I just want to check though. They also sell them in pairs (You have to buy 2 Lefts and buy 2 Rights). http://www.autosupplyco.com/ShopByVehicle.epc?q=2004-JEEP-Liberty-V6--6ci--3.7l--F/i--Vin--K-Brake/wheel--Bearing&yearid=2004%40%402004&makeid=38%40%40JEEP%40%40T&modelid=9141%40%40LIBERTY&engineid=32699%40%40V6%2D226ci+3%2E7L+F%2FI+Vin+K%40%4032699&catid=4%40%40Brake%2FWheel+Bearing&subcatid=67@@Front+Wheel+Bearings+and+Seals&mode=PA |
|
| Author: | Tokyojoe [ Sun Dec 06, 2009 5:53 pm ] |
| Post subject: | |
I am wondering if there is a difference due to the ABS. Non-ABS list one type only. Anyone got any experience with partsgeek.com? |
|
| Author: | Jeepjeepster [ Mon Dec 07, 2009 12:14 am ] |
| Post subject: | |
Yeah, there is a difference between abs and Non abs. Not too sure about the left right though. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|