| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Who sells this.... http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=47428 |
Page 1 of 2 |
| Author: | mrneen [ Mon Oct 26, 2009 10:08 pm ] |
| Post subject: | Who sells this.... |
Where can i get this "PB" that everyone talks about? who sells it... are theere abny other brands that work just as well? and where can i get them plan on doing my lift this friday and i need some stuff so i can ease some of the bolts out... thanks |
|
| Author: | Budke [ Mon Oct 26, 2009 10:15 pm ] |
| Post subject: | |
Get the PB Blaster. Theres different types of PB. You can get it at Autozone, Advance Auto Parts, probably napa and O'rielly's too. Its 2 for $8 at Autozone. One can is $4.99. |
|
| Author: | QuestMan [ Mon Oct 26, 2009 10:16 pm ] |
| Post subject: | |
I believe the "PB" that you are asking about, is 'PB Blaster', sold at Autozone, Advance Auto, maybe Walmart. Many places sell it. Spray your bolts every day for a couple of days, so it can work in. Good Luck! 
Supposedly, Kroil is even better, but it's expensive, and I'm not sure where you can get it, other than online. It used to be called, PB Blaster, but it may be called PB penetrating catalyst, now. I believe they are the same thing. |
|
| Author: | Budke [ Mon Oct 26, 2009 10:18 pm ] |
| Post subject: | |
Not sure about walmart. Never seen it there. And, yeah, it is best to spray it on a few days in advance to let it really soak in and work, but a good 15-20 minute soaking is all you really need unless the bolts are really really stubborn. |
|
| Author: | kskj [ Mon Oct 26, 2009 10:23 pm ] |
| Post subject: | |
Walmart has it here thats were i bought mine. |
|
| Author: | mrneen [ Mon Oct 26, 2009 10:25 pm ] |
| Post subject: | |
thanks alot for the quick response guys... i am going to buy it tomorrow.. spray some on and hopefully all will be good when i put my kift on Friday |
|
| Author: | Hood297 [ Mon Oct 26, 2009 10:33 pm ] |
| Post subject: | |
Diggerfreak posted an article done by some machinests that did a test on "scientifically rusted" bolts and found that the best penetrating oil was a mixture of acetone and ATF, but following that was kroil's oil, and close behind that was liquid wrench, which is about the same as PB and I think works better too. just my $.02 |
|
| Author: | Budke [ Mon Oct 26, 2009 10:34 pm ] |
| Post subject: | |
Man, I should have gone to walmart and gotten my 10% off!! Oh well. But yeah, this stuff works like a charm. Didn't help me get my thermostat bolt out but thats because it was stripped AND stuck AND in an awkward spot. hah. But I knew of a few stubborn bolts around and used it on that and got them out like butter! |
|
| Author: | durangotang [ Mon Oct 26, 2009 11:09 pm ] |
| Post subject: | |
Hood297 wrote: Diggerfreak posted an article done by some machinests that did a test on "scientifically rusted" bolts and found that the best penetrating oil was a mixture of acetone and ATF, but following that was kroil's oil, and close behind that was liquid wrench, which is about the same as PB and I think works better too.
just my $.02 I still think that test was a conspiracy against PB!!! 
Plus it smells far better than competitors
|
|
| Author: | Budke [ Mon Oct 26, 2009 11:19 pm ] |
| Post subject: | |
durangotang wrote: I still think that test was a conspiracy against PB!!! Plus it smells far better than competitors Agreed. PB dosen't smell half bad. 
|
|
| Author: | Boiler [ Mon Oct 26, 2009 11:39 pm ] |
| Post subject: | |
Funny, I was wondering where to buy it myself this afternoon. I tried walmart first because I didn't think napa would have diapers and garlic powder, which I also needed.... I saw this there, seemed like what I was looking for, and now that I've come home and checked I guess it was the right stuff. http://blasterchemical.com/display.cfm?p=50003&pid=4 |
|
| Author: | Budke [ Mon Oct 26, 2009 11:45 pm ] |
| Post subject: | |
Boiler wrote: Funny, I was wondering where to buy it myself this afternoon. I tried walmart first because I didn't think napa would have diapers and garlic powder, which I also needed....
I saw this there, seemed like what I was looking for, and now that I've come home and checked I guess it was the right stuff. http://blasterchemical.com/display.cfm?p=50003&pid=4 Yep, thats the stuff. The "As Seen On TV" made me skeptical. Nothing on TV ever works..... But I was wrong! |
|
| Author: | Neatus [ Tue Oct 27, 2009 10:25 am ] |
| Post subject: | |
PB! I thought you were talking about peanut butter.....I once had a peanut butter mag light holder. |
|
| Author: | hrogi [ Tue Oct 27, 2009 1:15 pm ] |
| Post subject: | |
If you get PB blaster on your clothes you can use Peanut butter to remove it. PB fixing PB.. But yet this PB blaster works wonders if use 24 to 48 in advance. And reaplied every 4 to 12 hours. for really tuff stuff. |
|
| Author: | jhblackwell [ Tue Oct 27, 2009 2:24 pm ] |
| Post subject: | |
Hood297 wrote: liquid wrench, which is about the same as PB and I think works better too.
X2. I'm old school and use Liquid Wrench for everything. Works great, is easy to find and cheap. 
|
|
| Author: | KJ 119 [ Tue Oct 27, 2009 5:13 pm ] |
| Post subject: | |
durangotang wrote: Hood297 wrote: Diggerfreak posted an article done by some machinests that did a test on "scientifically rusted" bolts and found that the best penetrating oil was a mixture of acetone and ATF, but following that was kroil's oil, and close behind that was liquid wrench, which is about the same as PB and I think works better too. just my $.02 I still think that test was a conspiracy against PB!!! Plus it smells far better than competitors X2 on that
No matter what you use it's gonna get everywhere,might as well smell yummy.
|
|
| Author: | Albert [ Tue Oct 27, 2009 5:16 pm ] |
| Post subject: | |
I have used both liquid wrench and pb blaster with good results. They both seem to work good but I am not sure which one is better. |
|
| Author: | weston02kj [ Sat Oct 31, 2009 9:58 am ] |
| Post subject: | |
saw it at local dollar general
|
|
| Author: | Neatus [ Sat Oct 31, 2009 10:43 am ] |
| Post subject: | |
My dad is a Liquid Wrench believer but when the stuff gets really tough he has lots of faith in the cutting torch...we have had to use it several times on my northern NY KJ. |
|
| Author: | oddball [ Sun Nov 01, 2009 10:37 am ] |
| Post subject: | |
PB Blaster has never failed me. |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|