| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| O2 sensoe codes http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=47616 |
Page 1 of 1 |
| Author: | jimjeep0 [ Thu Nov 05, 2009 8:54 pm ] |
| Post subject: | O2 sensoe codes |
I had engine replaced and now have codes 0158 and 0161, both are Bank2/sensor2. Which one is that? Could blowing old engine have fried this sensor? Should I replace whichever one it is or does anybody think it could be something else. Ant thoughts on lower ball joints as While under I noticed my ball joint boot is torn. thanks |
|
| Author: | tommudd [ Thu Nov 05, 2009 9:21 pm ] |
| Post subject: | |
bank 2 sensor 2 is the right side ( under passengers area) just replace it, check the wires also to make sure they are hooked up and not pinched since you have had the motor replaced ball joints best are Moog |
|
| Author: | jimjeep0 [ Thu Nov 05, 2009 9:28 pm ] |
| Post subject: | |
Is that the upstream or downstream? Are the wires that come out and go to wire connector part of new one? Do they just unscrew? Any idea of cost? Aftermarket or Chrysler? How bout cost of Moog ball joint? |
|
| Author: | tommudd [ Thu Nov 05, 2009 9:39 pm ] |
| Post subject: | |
downstream you can buy ones that have the factory type connector get one of them, got mine at an Auto Value store here SG1389 for 32 bucks I think aftermarket of course although some will say only OEM will work Check JeepinByAl he has the Moogs or a local parts store. I replaced mine 3 years ago and they were like 45 bucks I think |
|
| Author: | jimjeep0 [ Thu Nov 05, 2009 10:45 pm ] |
| Post subject: | |
thanks for the info. Was just checking out the link in your sig, after I hit the lottery I'll be giving you a call. Looks like a real cool place. Just did Great Adventure safari with my 5 year old daughter maybee she'll be a tour guide. thanks again |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|