| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Missing a few pieces??? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=47635 |
Page 1 of 1 |
| Author: | Budke [ Fri Nov 06, 2009 2:42 pm ] |
| Post subject: | Missing a few pieces??? |
Got my towhooks in today from Meduncan. Bought these beasts for $25! But I think theres a few pieces missing, but I'm not sure. Everything in the picture is everything that was in the box.
|
|
| Author: | Budke [ Fri Nov 06, 2009 3:06 pm ] |
| Post subject: | |
And here is everything thats bolted on. All I have left over is one bolt.
|
|
| Author: | JeepinJarhead03 [ Fri Nov 06, 2009 3:18 pm ] |
| Post subject: | |
that bolt ya got left over doesn't belong but it looks like you're missin a nut for the 4th stud, the free to roam bolts screw into a clip that "should" be there on your vehicle i'd get a 4 pack of the appropriate nuts, you'd want to replace those used nuts anyway Quit gigglin' |
|
| Author: | Budke [ Fri Nov 06, 2009 3:40 pm ] |
| Post subject: | |
Those clips aren't on my libby. |
|
| Author: | 501 [ Fri Nov 06, 2009 6:09 pm ] |
| Post subject: | |
Take your front end off like this:
You need to remove the two black caps (The one on the passenger side is off in this shot) then you can slide the bar with the two bolts on it through there and into the holes. Then take another bolt and drop it through the third hole (you might have to make it a little bigger). Tighten down the bolts and re-attach the front end. You might want to stop at NAPA and pick up some plastic rivets first. |
|
| Author: | ramlebliberty [ Fri Nov 06, 2009 8:05 pm ] |
| Post subject: | |
who killed the cheeta? I see what your missing, blue cheese & celery |
|
| Author: | USAFCOP [ Fri Nov 06, 2009 8:23 pm ] |
| Post subject: | |
ramlebliberty wrote: who killed the cheeta?
I see what your missing, blue cheese & celery That's what I was thinking too... Why am I hungry for wings... |
|
| Author: | Budke [ Sat Nov 07, 2009 1:36 am ] |
| Post subject: | |
Hah, the mail came when they just finished cooking. I got distraccted by my hooks |
|
| Author: | tonycrd [ Sat Nov 07, 2009 5:27 pm ] |
| Post subject: | |
You have an '02..what do you mean you don't have the nuts in the front beam? They should be there.... |
|
| Author: | valvestem [ Sat Nov 07, 2009 5:49 pm ] |
| Post subject: | |
I think this what you should have:
|
|
| Author: | Budke [ Sat Nov 07, 2009 7:49 pm ] |
| Post subject: | |
It didn't come with those clip things that go on the single hole part. Thats what I need. Those and 1 more nut. |
|
| Author: | Cobalt-60 [ Sat Nov 07, 2009 8:38 pm ] |
| Post subject: | |
See my post here about M10x1.5 U-Multi Thread Nuts: http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=30901 |
|
| Author: | valvestem [ Sat Nov 07, 2009 10:04 pm ] |
| Post subject: | Clip |
Try Napa Parts Pro Online, look for J-Type cage nuts for the "clip". |
|
| Author: | Budke [ Tue Nov 10, 2009 1:32 am ] |
| Post subject: | |
The guy got the clips off and he's sending them to me! Woo. Hooks should hopefully be installed by friday. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|