Missing a few pieces???

Budke · **Posted:** Fri Nov 06, 2009 2:42 pm

Got my towhooks in today from Meduncan. Bought these beasts for $25!

But I think theres a few pieces missing, but I'm not sure.
Everything in the picture is everything that was in the box.

Budke · **Posted:** Fri Nov 06, 2009 3:06 pm

And here is everything thats bolted on. All I have left over is one bolt.

JeepinJarhead03 · **Posted:** Fri Nov 06, 2009 3:18 pm

that bolt ya got left over doesn't belong

but it looks like you're missin a nut for the 4th stud, the free to roam bolts screw into a clip that "should" be there on your vehicle

i'd get a 4 pack of the appropriate nuts, you'd want to replace those used nuts anyway

Quit gigglin'

Budke · **Posted:** Fri Nov 06, 2009 3:40 pm

Those clips aren't on my libby.

501 · **Posted:** Fri Nov 06, 2009 6:09 pm

Take your front end off like this:

You need to remove the two black caps (The one on the passenger side is off in this shot) then you can slide the bar with the two bolts on it through there and into the holes. Then take another bolt and drop it through the third hole (you might have to make it a little bigger).

Tighten down the bolts and re-attach the front end. You might want to stop at NAPA and pick up some plastic rivets first.

ramlebliberty · **Posted:** Fri Nov 06, 2009 8:05 pm

who killed the cheeta? :roll:

I see what your missing, blue cheese & celery :wink:

USAFCOP · **Posted:** Fri Nov 06, 2009 8:23 pm

ramlebliberty wrote:

who killed the cheeta? :roll:

I see what your missing, blue cheese & celery :wink:

That's what I was thinking too... Why am I hungry for wings...

Budke · **Posted:** Sat Nov 07, 2009 1:36 am

Hah, the mail came when they just finished cooking.

I got distraccted by my hooks

tonycrd · **Posted:** Sat Nov 07, 2009 5:27 pm

You have an '02..what do you mean you don't have the nuts in the front beam?

They should be there....

valvestem · **Joined:** Thu Jul 07, 2005 7:01 pm **Posts:** 222

I think this what you should have:

Budke · **Posted:** Sat Nov 07, 2009 7:49 pm

It didn't come with those clip things that go on the single hole part.
Thats what I need. Those and 1 more nut.

Cobalt-60 · **Posted:** Sat Nov 07, 2009 8:38 pm

See my post here about M10x1.5 U-Multi Thread Nuts:

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=30901

valvestem · **Joined:** Thu Jul 07, 2005 7:01 pm **Posts:** 222

Try Napa Parts Pro Online, look for J-Type cage nuts for the "clip".

Budke · **Posted:** Tue Nov 10, 2009 1:32 am

The guy got the clips off and he's sending them to me!
Woo. Hooks should hopefully be installed by friday.

Missing a few pieces???

Who is online