| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| breather tubes... http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=48776 |
Page 1 of 2 |
| Author: | riptricket [ Mon Dec 28, 2009 3:48 pm ] |
| Post subject: | breather tubes... |
okay... so on this link, the pics are not there...http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=16&t=7229 but what size is the tube and what size are the clamps in order to do this mod? (breather tube extensions) got some time to kill today when doing the oil change. |
|
| Author: | Boiler [ Mon Dec 28, 2009 4:40 pm ] |
| Post subject: | Re: breather tubes... |
I haven't done mine yet, but yesterday I bought 5/16" fuel line to do the job, upon instruction from 1996xj & Towstrap. They've done theirs with the same stuff. I was told 20 feet of it would do the trick. It will fully replace the existing tubing. Once they hand you the tube, get the appropriate sized clamps. |
|
| Author: | riptricket [ Mon Dec 28, 2009 4:43 pm ] |
| Post subject: | Re: breather tubes... |
where did you get this line from? lowes? auto zone? is 20 ft really necessary? i just want to extend them. |
|
| Author: | riptricket [ Mon Dec 28, 2009 4:53 pm ] |
| Post subject: | Re: breather tubes... |
also how does one connect the hoses? a piece of tubing? or does the new one fit over after you cut off the actual breather |
|
| Author: | Diggerfreek [ Mon Dec 28, 2009 5:01 pm ] |
| Post subject: | Re: breather tubes... |
A couple brass hose unions work fine. you will end up using 15 to 20 ft depending on how you route the hoses |
|
| Author: | riptricket [ Mon Dec 28, 2009 5:03 pm ] |
| Post subject: | Re: breather tubes... |
size of hose? also, do you use the clamps to clamp the hose onto the union, or should it stay good enough? I just want to do this right the first and only time. I wish that the pics from the topic posted above would have worked so i wouldn't have had to ask so many questions. |
|
| Author: | 03CDKJ [ Mon Dec 28, 2009 7:11 pm ] |
| Post subject: | Re: breather tubes... |
Boiler wrote: I haven't done mine yet, but yesterday I bought 5/16" fuel line to do the job, upon instruction from 1996xj & Towstrap. They've done theirs with the same stuff. I was told 20 feet of it would do the trick. It will fully replace the existing tubing.
Once they hand you the tube, get the appropriate sized clamps. |
|
| Author: | riptricket [ Mon Dec 28, 2009 7:35 pm ] |
| Post subject: | Re: breather tubes... |
who ever said the parts are under $20 is mistaken... |
|
| Author: | riptricket [ Mon Dec 28, 2009 8:32 pm ] |
| Post subject: | Re: breather tubes... |
unless someone knows where to get the 5/16 line for less than $1.30 a foot... |
|
| Author: | KJ 119 [ Mon Dec 28, 2009 8:47 pm ] |
| Post subject: | Re: breather tubes... |
riptricket wrote: who ever said the parts are under $20 is mistaken... I spent about 50 bucks on this mod and used MORE than 20 feet of hose. |
|
| Author: | riptricket [ Mon Dec 28, 2009 8:48 pm ] |
| Post subject: | Re: breather tubes... |
got any pics? |
|
| Author: | riptricket [ Mon Dec 28, 2009 9:41 pm ] |
| Post subject: | Re: breather tubes... |
okay i have located the breathers... how the hell does one remove the white "breather" in order to install the coupler for the extension line? |
|
| Author: | 03CDKJ [ Mon Dec 28, 2009 10:10 pm ] |
| Post subject: | Re: breather tubes... |
 Pull it out...  Why don't you just pull off all of the old hose and use new hoses instead of Attaching fittings and extending the current hoses Chances are the old hoses are starting to rot anyway... I bought 20' of hose and a few hose clamps for under $30... and still have hose left over.... Just for craps and giggles try searching Breather and Extend... |
|
| Author: | riptricket [ Mon Dec 28, 2009 10:13 pm ] |
| Post subject: | Re: breather tubes... |
after finding all 4, I only see that the rear diff majorly needs to be relocated and possibly the transmission. the front diff is already as high as the battery, and i don't think it really needs relocating, nor do I really think that the t-case does. Am i seeing this correctly? |
|
| Author: | riptricket [ Mon Dec 28, 2009 10:22 pm ] |
| Post subject: | Re: breather tubes... |
well... the problem with replacing all 4 of them is that they sell them by the foot here... 5/16 tube that is. and it is expensive when you add them up. The rear diff is easily replaceable. |
|
| Author: | 03CDKJ [ Mon Dec 28, 2009 10:32 pm ] |
| Post subject: | Re: breather tubes... |
riptricket wrote: well... the problem with replacing all 4 of them is that they sell them by the foot here... 5/16 tube that is. and it is expensive when you add them up. The rear diff is easily replaceable. They sell it by the foot Everywhere... So...  and it's a lot cheaper than getting Mud/Water/Muck in your differentials... Then having to clean the diffs with parts cleaner etc and new diff fluid... If your lucky and don't mess up the bearings ect.... It only takes 3-4 feet per differential.... It's not that big of a deal.....unless you plan on going through lots of water or mud. If you can't afford it... Don't do it....Just stay clear of deep water etc.... That's all I have to contribute... Good luck I'm going to the Ohio Chat room where breathing is easier! 
|
|
| Author: | Boiler [ Tue Dec 29, 2009 1:11 am ] |
| Post subject: | Re: breather tubes... |
I replied to this thread, then realized it didn't take, so replied again and walked away...still didn't take! WTF Right after you said "1.30 per foot" I said something like: I got it at O'Reilly Auto Parts for $0.60 per foot yesterday. Clamps were a few bucks for a little pack of them. You want to do the whole hose, the old hoses are prone to drying out and cracking, so I've heard. Even at 1.30, 20' is $26, definitely cheap insurance. x2 about the one that already reaches the battery. |
|
| Author: | riptricket [ Tue Dec 29, 2009 1:26 am ] |
| Post subject: | Re: breather tubes... |
okay... i will bite the bullet and if it is that price at oreilly's I will replace them all... now two questions. 1. how does one remove the hose from the stock positions? just pull hard? 2. does one reuse the old "breathers" or does one purchase new ones... if so where? and yeah the posting thing is still messed up b/c i posted a new thread awhile ago and i couldn't find it. |
|
| Author: | JL Rockies [ Tue Dec 29, 2009 2:00 am ] |
| Post subject: | Re: breather tubes... |
I re-used the stock ones. I located the rear diff up by the fuel door. I had to drop the tranny on mine since there was only a button on top and I extended all the rest of the breathers up the the firewall with a single loop so the all look like 6's. |
|
| Author: | LIV42DY [ Tue Dec 29, 2009 11:11 pm ] |
| Post subject: | Re: breather tubes... |
I made a distribution block, ran the rear, transfer, trans and front dif to it and then ran a single line to a self made breather, and attached it to the inside body between the battery and the fuse block. the main distribution block is attached to the unidody drivers side, centered by the transfer case. Sorry no pictures. 
|
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|