LOST JEEPS :: View topic - Replacement Key

LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/

Replacement Key http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=49029	Page 1 of 1

Author:	surfRenegade [ Thu Jan 07, 2010 2:31 pm ]
Post subject:	Replacement Key
I recently had a bunch of stuff stolen at the beach...the key to my Jeep being one of them. I have one original key left now that has the keyless entry stuff on it. I ordered a spare key on ebay that doesnt have the keyless entry stuff on it but has a transponder chip in it. I tried getting a regular key cut and it would stall after a few seconds. Is there a way to get this new key with the chip in it to work without having to go to the dealership? There is instructions that came with it that show how to program it when you have two original keys, but I only have one. Thanks Sam

Author:	stoutdog [ Thu Jan 07, 2010 2:46 pm ]
Post subject:	Re: Replacement Key
When I bought my CRD used, it came with only one key. If I remember correctly, I had a local locksmith program the second one...

Author:	InCommando [ Thu Jan 07, 2010 3:36 pm ]
Post subject:	Re: Replacement Key
IIRC, there are instructions in the owners manual for programming a new key. I think.

Author:	TexasRock [ Thu Jan 07, 2010 4:46 pm ]
Post subject:	Re: Replacement Key
See if this helps.... Programming a new keyless entry remote To begin, you will need an existing (WORKING) remote, and the new remote(s) you want to program. Press (LOCK) button 5 times at 2 second Intervals to resynchronize transmitter, Attempt to function transmitter, If working as designed discontinue programming. Turn ignition to run position, (Allow Ignition chimes to stop). Using any original (working )transmitter, press the [UNLOCK] button for 4 to 10 seconds. Within the specified 4 to l0 seconds, continue pressing the [UNLOCK] button and press the [PANIC] button for 1 second and release both buttons. A chime will sound to indicate that the transmitter programming mode has been entered (allow 3 seconds for chime to sound). Press [LOCK] and [UNLOCK] buttons simultaneously for 1 second and release. Press and release any button an the same transmitter and a chime will sound after successfully programming the transmitter. Repeat steps 5 through 6 to program additional transmitters. Turn ignition to OFF position. Transmitter programming mode will discontinue after 60 seconds. (All transmitter programming must be completed within time specified). NOTE If equipped with VTSS, the system must be disarmed and/or unlocked to enter program mode. Warning: Simultaneous programming of multiple vehicles should be avoided as any transmitter activated within 30 meters (100 feet) can get programmed and may result in cross-vehicle programming. Part Number for remote: 04602260AA

Author:	Diggerfreek [ Thu Jan 07, 2010 4:53 pm ]
Post subject:	Re: Replacement Key
Time for a trip to the dealer They will have to flash the security module with the new key fob specs. The reprogram only works if you have both factory keys and want to program a third...

Author:	stoutdog [ Thu Jan 07, 2010 5:24 pm ]
Post subject:	Re: Replacement Key
Diggerfreek wrote: Time for a trip to the dealer They will have to flash the security module with the new key fob specs. The reprogram only works if you have both factory keys and want to program a third... I would recommend that the OP tries what TexasRock posted. As I stated before, I was given only one key fob when I purchased my CRD and was able to program a second one, without a trip to the dealer... I just can't remember exactly how the locksmith and I did it. You may need two keys to program for keyless entry, but you can program a transponder chip to not shut off your KJ after the 2 sec. grace period with only one original.

Author:	tjkj2002 [ Thu Jan 07, 2010 5:45 pm ]
Post subject:	Re: Replacement Key
Gotta make sure that the transponder key has the correct chip to speak with your specific year of vehicle.I'm pretty sure the older transponder keys will not work with the newer keyfob transponder keys for the newer ones,I may be wrong though.

Author:	surfRenegade [ Thu Jan 07, 2010 6:06 pm ]
Post subject:	Re: Replacement Key
Thanks for all the responses guys! Gonna give it a try later tonight

Author:	Dje Ryu [ Sat Jan 09, 2010 3:06 pm ]
Post subject:	Re: Replacement Key
Any luck? I've only had one key since I got my KJ and I need a 2nd for the remote start system I recently got. Don't really want to pay dealership prices for a key, though.

Author:	surfRenegade [ Tue Jan 12, 2010 8:47 pm ]
Post subject:	Re: Replacement Key
Sorry, still getting around to it... decided to go for a little paddle around in 8 foot surf with my new hip... didnt work out well and sat in ER all day to get stitches in my head. Got the flu while i was there. as soon as im up and around ill check this out and post the results

Author:	Diggerfreek [ Tue Jan 12, 2010 9:00 pm ]
Post subject:	Re: Replacement Key
Crappy

Author:	Dje Ryu [ Tue Jan 12, 2010 10:57 pm ]
Post subject:	Re: Replacement Key
Dang! Hope you get better (and your luck turns around ) soon. Thanks for the update, though.

Author:	mikey1273 [ Wed Jan 13, 2010 6:45 pm ]
Post subject:	Re: Replacement Key
I went through that same thing with outback key fobs when I bought that car I only got one then I got another off ebay. someone on a forum gave me the directions and it was such silly stuff I remember you had to do to program it. like put the key in turn it on and off 15 times in 45 seconds then when the horn honked open the drivers door and shut it quickly then hit the lock key on one of the fobs when the horn honks open the door and shut it again press lock on the next fob and repeat untill your done then start the car and turn it of to exit that mode. my neighbor caught me doing it and thought it was real funny. asked me what kind of game I was playing with the car and who won. How do you get an auto start I seen it in the parts list and service manual, can you order it from the dealer and install it yourself?

Author:	Joe Romas [ Mon Jan 18, 2010 9:01 am ]
Post subject:	Re: Replacement Key
The original poster does not mention his year and it may possibly make a difference. As for a lock smith being able to program another key when you only have one. Some lock smiths have the equiptment to do this and some don't. For my 06 the instructions in the owners manual for programming another requires the owner to have two working keys. If not a trip to the dealer, or a well equipted lock smith, is in order. I got a blank non remote key with a chip off ebay and programmed it myself after having it cut. So the moral here is get a third key before you loose one If not you'll be at the dealer's mercy. I recently got a ignition lock cylinder for my XJ from my local dealer for twice what an online vendor says is the retail cost So they are paying the rent any way they can

Author:	surfRenegade [ Mon Jan 18, 2010 7:53 pm ]
Post subject:	Re: Replacement Key
Ughh... I got an 06... probably wont work then.

Author:	HoosierJeeper [ Mon Jan 18, 2010 8:08 pm ]
Post subject:	Re: Replacement Key
I got 2 keys for mine, one with the remote, and another plain gray key. No remote on that one....

Author:	surfRenegade [ Tue Jan 19, 2010 6:28 pm ]
Post subject:	Re: Replacement Key
Just to let you guys know I did try those instructions posted above. They do not work for my 2006 Renegade

Author:	CRD Joe [ Thu Jan 28, 2010 9:56 pm ]
Post subject:	Re: Replacement Key
How much would a dealership second key cost?

Author:	ATXKJ [ Thu Jan 28, 2010 10:01 pm ]
Post subject:	Re: Replacement Key
I think the key was ~$70 and the programming ~$50 my wife managed to lose hers the day before we were going to Moab (found it a year later in a different purse) and 05's had to have 2 active keys to program another

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/