LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

What is best REAR coil spring compressor
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=491		 Page 1 of 1
Author:  habitTrail [ Sat Jul 16, 2005 12:00 pm ]
Post subject:  What is best REAR coil spring compressor
The rear coil springs are easy and simple to remove/install ... until a spacer lift is installed. So, short of a six hundred pound gorilla to stand on the rear axle, what is the best spring compressor to use for the rear coils?
Author:  Eddo [ Sat Jul 16, 2005 12:24 pm ]
Post subject: 
I just use the stock jack provide with the Jeep to bing the axle down. Just put it on the control arm and up againt the frame and open her up.
Author:  jpzkj [ Sun Jul 17, 2005 12:02 am ]
Post subject: 
I have done it as follows:


Jack the KJ with a floor jack under the differential (both wheels will lift)
Jackstands under the unibody in front of the rear wheels(both sides)
Tires off...lower shock mount bolt removed
Lower the floor jack and place it under the axle tube on one side of the jeep
Floor jack under one side of the axle and lift it (dont lift the jeep off the jack stands! )
Pull the springs out (step on the wheel studs if you need a little more room )

Button up that side and then repeat the process on the other one 8)


Good luck and be careful..
Author:  Growler [ Mon Jul 18, 2005 8:42 am ]
Post subject: 
Yeah, what he just said. That's the way I got mine on, and I don't see why that wouldn't take them off.
Author:  streetKJ [ Thu Oct 05, 2006 3:28 am ]
Post subject: 
This is a 50 page bump, lol!

My question however is: What is the best way to remove the front McPherson strut (spring and shock assembly)?
Author:  Jeepjeepster [ Thu Oct 05, 2006 7:27 am ]
Post subject: 
What is the best way to remove the springs? Or the entire thing from the jeep?

Just unbolt it to get it off the jeep.. :lol:

You need to compress the spring and take the bolt off the top of the strut to take the spring out.. :wink:
Author:  streetKJ [ Thu Oct 05, 2006 10:05 am ]
Post subject: 
Jeepjeepster wrote:
What is the best way to remove the springs? Or the entire thing from the jeep?

Just unbolt it to get it off the jeep.. :lol:

You need to compress the spring and take the bolt off the top of the strut to take the spring out.. :wink:


So what do you compress the front springs with?
Author:  KJ_Dave [ Thu Oct 05, 2006 10:20 am ]
Post subject: 
Try one of these, it only costs about $40. http://www.skywaytools.com/coilspringcompressors.html
Author:  Maximum Carnage [ Thu Oct 05, 2006 10:24 am ]
Post subject: 
So some have used some sort of spring compression tool and others haven’t?
Author:  spoonplugger1 [ Thu Oct 05, 2006 10:36 am ]
Post subject: 
Most of your quality parts stores have spring compressors to rent for a nominal fee. Mine just gives me the tools I need as long as I bring them right back, but I have a long term parts business with them.
Author:  nolakj [ Thu Oct 05, 2006 11:55 am ]
Post subject: 
Maximum Carnage wrote:
So some have used some sort of spring compression tool and others haven’t?


The thread started with removing the rear springs with spacers installed. Then the 50 page bump moved to the front strut assy. Anyone who tries to remove the fronts without a tool must have a death wish......or is really really really really strong.
Author:  ATXKJ [ Thu Oct 05, 2006 12:20 pm ]
Post subject: 
and if you're compressing CRD front springs - I think everyone's gone to a wall mounted compressor (common at tire stores) or hydraulic - the smaller units don't work well
Author:  SD-KJ [ Thu Oct 05, 2006 12:47 pm ]
Post subject: 
i had mine done at a shop with a wall compressor i stood far away. The guy put A LOT of pressure on the springs when he put the spacers in there. :shock:

I would not want to try and compress that from strut assembly by myself... some people might, it may be different if your taking the stock assembly apart and not one with spacers in there. I would guess there is less pressure there....


-nick
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/