LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

phxtoads 4x4 mod
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=49593		 Page 1 of 1
Author:  Neatus [ Mon Jan 25, 2010 1:15 am ]
Post subject:  phxtoads 4x4 mod
Okay, ever since I saw Todd aka phxtoad's awesome mod I wanted to do it to mine so I went ahead and did it....and I took pics of how to to it....there is no need for a tutorial on this one but I am putting one up in hopes it inspires more folks to add this to their KJ's for after trail fun...Oh and it may even help JJ sell his rack...ready....set....go!
Here is what you need, a drill a pair of machine screws with nuts and washer and a wall mount bottle opener. Paint if you want to make things look nice.
Image
Bottle openers are like 20 bucks so I found a couple of these hitch ones on clearance at Wally World
Image
For mine I drilled out the rivets that held it to the hitch mount
Image
Image
Then I painted the screws black then
Found a mounting spot on my All J Rack and made sure it would clear the door and marked and drilled the holes.
Image
Image
I didn't like how the top and bottom weren't flush with the rack so I took them to the rickitty Chinese made grinder
Image
Mount the bottle opener with your screws with nut on back
Image
Shazam! Enjoy a brew....responsibly!
Image
Author:  501 [ Mon Jan 25, 2010 1:33 am ]
Post subject:  Re: phxtoads 4x4 mod
That there is one of the best mods I've seen in a while!

I'll have to add this one to my KJ :pepper: :BANANA:
Author:  TAHOE [ Mon Jan 25, 2010 9:03 am ]
Post subject:  Re: phxtoads 4x4 mod
I saw one of those mounted on the inside of the tailgate on the Rev's Libby over the weekend :mrgreen:
Author:  tommudd [ Mon Jan 25, 2010 9:42 am ]
Post subject:  Re: phxtoads 4x4 mod
TAHOE wrote:
I saw one of those mounted on the inside of the tailgate on the Rev's Libby over the weekend :mrgreen:


Yes been one of the most used mods on mine for over 5 years now !!

Great job Neatus
Author:  phxtoad [ Mon Jan 25, 2010 3:38 pm ]
Post subject:  Re: phxtoads 4x4 mod
Nice!

Sadly I took mine off this last weekend because it was contacting my loose tail gate plastic and making an annoying sqweak.

TL
Author:  TexasRock [ Mon Jan 25, 2010 8:56 pm ]
Post subject:  Re: phxtoads 4x4 mod
:rockon:

Nothing better than a cold one with your friends!

Great job Neatus!!
Author:  JJsTJ [ Mon Jan 25, 2010 10:45 pm ]
Post subject:  Re: phxtoads 4x4 mod
PSSHT!!

What a great sound!
Author:  Tokyojoe [ Tue Jan 26, 2010 1:17 am ]
Post subject:  Re: phxtoads 4x4 mod
Great for post trail runs at the campsite :CAMPING: or at a tailgating event. :5SHOTS: Seems a pain to open the rear gate or window everytime though. You should've attached it to the rear or front bumper (if you have an aftermarket bumper). Spare tire mount coming out from the center cap. :seuss:
Author:  JeepinJarhead03 [ Tue Jan 26, 2010 1:22 am ]
Post subject:  Re: phxtoads 4x4 mod
Saw one mounted on the drivers side edge of a TJ's front bumper

I think OHV had one mounted inside his front fender well, that could have been one of the other CCOR guys though
Author:  Neatus [ Tue Jan 26, 2010 9:21 am ]
Post subject:  Re: phxtoads 4x4 mod
Tokyojoe wrote:
Great for post trail runs at the campsite :CAMPING: or at a tailgating event. :5SHOTS: Seems a pain to open the rear gate or window everytime though. You should've attached it to the rear or front bumper (if you have an aftermarket bumper). Spare tire mount coming out from the center cap. :seuss:

My ice chest resides in the back so I think it is a good spot...I mounted another one on the drivers side rollbar on the family CJ...easy access on that one.
Author:  Budke [ Tue Jan 26, 2010 9:28 am ]
Post subject:  Re: phxtoads 4x4 mod
The metal rest on the grinder is supposed to be 1/16" from the grinding wheel. :wink: :mrgreen:

But this is a good idea. I would do it if I drank beer often with pop tops. The beer I drink is most often in a can, and I'm usually inside. :D
Author:  Neatus [ Tue Jan 26, 2010 4:49 pm ]
Post subject:  Re: phxtoads 4x4 mod
Budke wrote:
The metal rest on the grinder is supposed to be 1/16" from the grinding wheel. :wink: :mrgreen:


Oh well that's nice....the grinder is dangerous no matter how close the gap is. IT shakes the table, makes fire shoots out of the electrical socket and barks at people that come to the door.
Author:  FreedomKJ [ Tue Jan 26, 2010 9:21 pm ]
Post subject:  Re: phxtoads 4x4 mod
Neatus wrote:
Budke wrote:
The metal rest on the grinder is supposed to be 1/16" from the grinding wheel. :wink: :mrgreen:


Oh well that's nice....the grinder is dangerous no matter how close the gap is. IT shakes the table, makes fire shoots out of the electrical socket and barks at people that come to the door.


Your grinder wouldn't bark at people if you didn't beat it with a stick. I'm gonna call the SPCCCG (Society for the Prevention of Cruelty to Cheap Chinese Grinders) on you. Image
Author:  Budke [ Tue Jan 26, 2010 10:13 pm ]
Post subject:  Re: phxtoads 4x4 mod
Neatus wrote:
Budke wrote:
The metal rest on the grinder is supposed to be 1/16" from the grinding wheel. :wink: :mrgreen:


Oh well that's nice....the grinder is dangerous no matter how close the gap is. IT shakes the table, makes fire shoots out of the electrical socket and barks at people that come to the door.


:ROTFL:
Author:  STINGN [ Tue Jan 26, 2010 10:35 pm ]
Post subject:  Re: phxtoads 4x4 mod
Budke wrote:
The beer I drink is most often in a can, and I'm usually inside. :D


how old are you :ROTFL:
Author:  Budke [ Wed Jan 27, 2010 10:19 am ]
Post subject:  Re: phxtoads 4x4 mod
STINGN wrote:
Budke wrote:
The beer I drink is most often in a can, and I'm usually inside. :D


how old are you :ROTFL:


Old enough. :SOMBRERO:
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/