Does anyone know what size the bolts are that are used to mount fuel tank skids. There is 6 of them in the rear 3 on each rear unibody. They are already thread slots. I am guessing some Libertys came with actutally fuel tank skids, but the CRD limited does not.

_________________
2005 Jeep Wrangler Rubicon TJ- Impact Orange
4'' RK LA, 35's KM2's, Warn front bumper, Warn rear bumper with tire swing, Warn gas skid, Nth oil skid, 4.88's, Alloy axles shafts F&R, Rokmen Corner armor with led's, and Rokmen sliders, custom back-up lights from gen-right, piaa 510's, IPF green glow fatboy's up front.

M12X1.75 (coarse) and at least 40mm long, i used metric grade 12.9

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632

Thanks! We found out they are also 7/16 x 1/2"

_________________
2005 Jeep Wrangler Rubicon TJ- Impact Orange
4'' RK LA, 35's KM2's, Warn front bumper, Warn rear bumper with tire swing, Warn gas skid, Nth oil skid, 4.88's, Alloy axles shafts F&R, Rokmen Corner armor with led's, and Rokmen sliders, custom back-up lights from gen-right, piaa 510's, IPF green glow fatboy's up front.

They all are M12x1.75,no metric thread has a SAE conversion.You will crossthread the holes if using SAE bolts and will not hold properly.

X2...except I've never heard of 7/16 x 1/2"....

You can probably get away with 20 mm + for length if you've just got the gas tank skid going on, and not a hitch / whatever else. FYI if you had them handy.

_________________
2005 KJ Renegade
Fabrications for sale: Aluminum Roof Rack (See Page 9)
Aluminum Gas Tank Skid -- Radiator Skid -- Front Strut Shims
Coming Soon: Rear Bumpers with lots of options