| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Fuel Skid http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=49762 |
Page 1 of 1 |
| Author: | JeepBumm68 [ Sun Jan 31, 2010 4:04 pm ] |
| Post subject: | Fuel Skid |
Does anyone know what size the bolts are that are used to mount fuel tank skids. There is 6 of them in the rear 3 on each rear unibody. They are already thread slots. I am guessing some Libertys came with actutally fuel tank skids, but the CRD limited does not. |
|
| Author: | JeepinJarhead03 [ Sun Jan 31, 2010 4:22 pm ] |
| Post subject: | Re: Fuel Skid |
M12X1.75 (coarse) and at least 40mm long, i used metric grade 12.9 |
|
| Author: | JeepBumm68 [ Sun Jan 31, 2010 8:33 pm ] |
| Post subject: | Re: Fuel Skid |
Thanks! We found out they are also 7/16 x 1/2" |
|
| Author: | tjkj2002 [ Sun Jan 31, 2010 8:44 pm ] |
| Post subject: | Re: Fuel Skid |
JeepBumm68 wrote: Thanks! We found out they are also 7/16 x 1/2" They all are M12x1.75,no metric thread has a SAE conversion.You will crossthread the holes if using SAE bolts and will not hold properly. |
|
| Author: | Boiler [ Sun Jan 31, 2010 11:39 pm ] |
| Post subject: | Re: Fuel Skid |
tjkj2002 wrote: JeepBumm68 wrote: Thanks! We found out they are also 7/16 x 1/2" They all are M12x1.75,no metric thread has a SAE conversion.You will crossthread the holes if using SAE bolts and will not hold properly. X2...except I've never heard of 7/16 x 1/2".... You can probably get away with 20 mm + for length if you've just got the gas tank skid going on, and not a hitch / whatever else. FYI if you had them handy. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|