Ok I like doing things the right way. I wont skimp or go the cheap route if I dont have to. With that said, is there something I can add to the Franky CRD Premium lift kit Im going to buy to get a little more lift out of it WITHOUT sacrificing or hurting anything? Im not looking for a 4+ inch lift, but maybe a clear 3" out of the deal.

Thank you in advance.


Tom

_________________
2006 KJ CRD Ltd - Suncoast, GDE Eco, EGR Delete, After market T-Stat, Skid Row skids, V6 airbox, 2.5" Turbo back
2005 KJ CRD Sport-Suncoast, Transco, GDE Hot-GDE Trans, EGR Delete, Skid Row skids, V6 airbox, 2.5" Turbo back, After market S-Stat
1987 Suzuki LWB Samurai -diesel powered, custom 4 link coil suspension 38.5 SX Swampers

TonyCRD is the only one who has really pushed the envelope on the CRDs
Due to the shorter CV on the drivers side you're limited in how high you can go.
Why not just install the Frankenlift and see where you are and go from there?
Super easy to add later if need be.

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

I've done nothing more than the out of the box franky and my rig is a sexual tyrannosaurus.

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.

And what more do we really want?
You've wheeled yours every where with no problems with the lift so if it works ....WHEEL IT!!!

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Thanks guys. I was just hoping to get as big a tire as resonably possible.

_________________
2006 KJ CRD Ltd - Suncoast, GDE Eco, EGR Delete, After market T-Stat, Skid Row skids, V6 airbox, 2.5" Turbo back
2005 KJ CRD Sport-Suncoast, Transco, GDE Hot-GDE Trans, EGR Delete, Skid Row skids, V6 airbox, 2.5" Turbo back, After market S-Stat
1987 Suzuki LWB Samurai -diesel powered, custom 4 link coil suspension 38.5 SX Swampers

i believe with the crd's that's still going to be the 265-75's unless you're up for alot of cutting like a fella did not long ago lol

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632

I roll 235/85R16 MT/R but I acknowledge they're only for the true enthusiast.

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.

That's what I was looking at. Any issues with that size that I should know about?

Thanks.

_________________
2006 KJ CRD Ltd - Suncoast, GDE Eco, EGR Delete, After market T-Stat, Skid Row skids, V6 airbox, 2.5" Turbo back
2005 KJ CRD Sport-Suncoast, Transco, GDE Hot-GDE Trans, EGR Delete, Skid Row skids, V6 airbox, 2.5" Turbo back, After market S-Stat
1987 Suzuki LWB Samurai -diesel powered, custom 4 link coil suspension 38.5 SX Swampers

The CRD's are heavier aren't they?

A friend of mine with a gasser Libby installed a Frankenlift, not the Franky CRD Premium lift, and got 3" of lift right out of the box. I suppose after a few months on the road it will settle.

The advice you're getting is sound. Try out the Franky CRD Premium lift and it it settles any I suppose you could always do a clevis lift to adjust.

_________________
my trail & highway ride (and occasional tow rig)
04 Liberty Sport with a 2.5" lift, ProComp 245/75R16 AT's and two Hella700FF lamps (more accessories to come)

my trail queen
95 YJ with a RE 4" lift, 33" ProComp Extreme's, M8000 Winch, Lockrite Locker up front, Super35 in the rear and 4.88 gears

Pablo had one of the original CRD Frankenlifts with the spacer and managed to install it without tearing the CV boots - he's running 235/85/16's too.
http://www.cardomain.com/ride/2662913/1


although he was looking for better rear springs.

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur