LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

what's this harness for?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=50171
Page 1 of 1

Author:  No.2KJ [ Sat Feb 13, 2010 5:07 pm ]
Post subject:  what's this harness for?

Image

I'm trying to hardwire my xm and gps and I came across this harness under the column. any ideas on what it's for?

Author:  nosnorb_808 [ Sat Feb 13, 2010 5:35 pm ]
Post subject:  Re: what's this harness for?

Hmmm... I dont know. Doesnt look stock to me though.

Author:  JeepinJarhead03 [ Sat Feb 13, 2010 6:07 pm ]
Post subject:  Re: what's this harness for?

thats not stock wiring, they didn't use nasty butt connectors

Author:  Zack A [ Sun Feb 14, 2010 9:42 am ]
Post subject:  Re: what's this harness for?

Can you get a pic of the black thing its all connected too?

Author:  Jeepjeepster [ Sun Feb 14, 2010 12:37 pm ]
Post subject:  Re: what's this harness for?

Looks like a mess to me.

Yeah, whats it going to?

And I love that switch by the 4x4 lever! I may put me one there if I ever need to add another one.

Author:  Dje Ryu [ Sun Feb 14, 2010 12:48 pm ]
Post subject:  Re: what's this harness for?

Not positive but, kind of looks like someone had a remote starter in it at some point.

Author:  No.2KJ [ Sun Feb 14, 2010 2:54 pm ]
Post subject:  Re: what's this harness for?

The switch on the console is for my FM modulator. Took me forever to decide on a spot. here's some other close ups of the mystery harness. thanks for the responses so far!

Image

Image

Author:  Zack A [ Sun Feb 14, 2010 3:01 pm ]
Post subject:  Re: what's this harness for?

My guess since it looks tied into the wiring in your steering harness is a remote starter of some sort.

Author:  Diggerfreek [ Sun Feb 14, 2010 4:33 pm ]
Post subject:  Re: what's this harness for?

yep.... it's not stock for sure

Author:  Jeep Dawg [ Mon Feb 15, 2010 11:52 pm ]
Post subject:  Re: what's this harness for?

there is only 2 people who know what it is for.
GOD and the person who did it.
I hate when people remove stuff and leave wiring exposed and not labled. At least put a tag on it saying what it was for or atleast HOT/GROUND/NETURAL

when ever i install any kine of wiring, it gets labled, tagged and marked on circut area

Author:  Zack A [ Thu Feb 18, 2010 5:25 pm ]
Post subject:  Re: what's this harness for?

Plus 1... If you have a meter, test to see what the outputs are.

Author:  RED_KJ_666 [ Sat Feb 20, 2010 11:08 pm ]
Post subject:  Re: what's this harness for?

I think I Win here BRAKE CONTROLLER harness. That's exactly what it looks like.

Author:  Dje Ryu [ Sun Feb 21, 2010 10:59 am ]
Post subject:  Re: what's this harness for?

RED_KJ_666 wrote:
I think I Win here BRAKE CONTROLLER harness. That's exactly what it looks like.



That would explain why there aren't enough wires for a remote start! I think you're right.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/