| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Do winches have "standardized" mounting patterns? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=50398 |
Page 1 of 1 |
| Author: | MtnLuvr [ Sun Feb 21, 2010 12:27 pm ] |
| Post subject: | Do winches have "standardized" mounting patterns? |
I've done some LOST searching and haven't found an answer regarding are winch mounting patterns (e.g. bolt size and spacing both directions) standardized for winches of a given size (e.g. same for all winches in the 9,000-10,000 lb rated pull capacity)? I'd appreciate any insight and info you could point me to. |
|
| Author: | JL Rockies [ Sun Feb 21, 2010 1:46 pm ] |
| Post subject: | Re: Do winches have "standardized" mounting patterns? |
Yes; everything that would fit on a KJ has the same footprint. I know someone who can get you a great winch. |
|
| Author: | kskj [ Sun Feb 21, 2010 2:30 pm ] |
| Post subject: | Re: Do winches have "standardized" mounting patterns? |
You can still get those? I need to get one before i go to moab this spring. |
|
| Author: | dgeist [ Sun Feb 21, 2010 6:55 pm ] |
| Post subject: | Re: Do winches have "standardized" mounting patterns? |
MtnLuvr wrote: I've done some LOST searching and haven't found an answer regarding are winch mounting patterns (e.g. bolt size and spacing both directions) standardized for winches of a given size (e.g. same for all winches in the 9,000-10,000 lb rated pull capacity)? I'd appreciate any insight and info you could point me to. The current issue of Peterson's 4-wheel and offroad is nearly all about recovery (everything from cages to winches to technique and safety). It includes a good winch comparison chart and measurements on everything. Dan |
|
| Author: | MtnLuvr [ Sun Feb 21, 2010 7:09 pm ] |
| Post subject: | Re: Do winches have "standardized" mounting patterns? |
dgeist wrote: The current issue of Peterson's 4-wheel and offroad is nearly all about recovery (everything from cages to winches to technique and safety). It includes a good winch comparison chart and measurements on everything. Dan Thanks....I'll go hunt it down. |
|
| Author: | stumpjumper_09 [ Sun Feb 21, 2010 11:38 pm ] |
| Post subject: | Re: Do winches have "standardized" mounting patterns? |
dgeist wrote: MtnLuvr wrote: I've done some LOST searching and haven't found an answer regarding are winch mounting patterns (e.g. bolt size and spacing both directions) standardized for winches of a given size (e.g. same for all winches in the 9,000-10,000 lb rated pull capacity)? I'd appreciate any insight and info you could point me to. The current issue of Peterson's 4-wheel and offroad is nearly all about recovery (everything from cages to winches to technique and safety). It includes a good winch comparison chart and measurements on everything. Dan X2 very good bathroom reading material |
|
| Author: | JL Rockies [ Mon Feb 22, 2010 12:31 am ] |
| Post subject: | Re: Do winches have "standardized" mounting patterns? |
kskj wrote: You can still get those? I need to get one before i go to moab this spring. Hells yeah |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|