I have a 2003 Renegade with the 3.7L and A/C so what serpentine belt doI need? Why is there a 6-point and a 7-point with A/C? A little help? HERE is a link to the NAPA site ith all the belts listed. Thanks a bunch guys and gals!
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Serpentine Belt p/n size help? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=50506 |
Page 1 of 1 |
| Author: | SavageUrge [ Wed Feb 24, 2010 8:05 pm ] |
| Post subject: | Serpentine Belt p/n size help? |
I have a 2003 Renegade with the 3.7L and A/C so what serpentine belt doI need? Why is there a 6-point and a 7-point with A/C? A little help? HERE is a link to the NAPA site ith all the belts listed. Thanks a bunch guys and gals!
|
|
| Author: | JeepinJarhead03 [ Wed Feb 24, 2010 8:31 pm ] |
| Post subject: | Re: Serpentine Belt p/n size help? |
the standard goodyear belt is 4060875 6 rib 87.5" |
|
| Author: | SavageUrge [ Thu Feb 25, 2010 1:09 am ] |
| Post subject: | Re: Serpentine Belt p/n size help? |
Thanks! I found it on Amazon along with the tensioner pulley assembly for just under $80 w/free shipping. I haven't ordered it yet though in case I find a better deal! Thanks again! |
|
| Author: | JeepinJarhead03 [ Thu Feb 25, 2010 1:30 am ] |
| Post subject: | Re: Serpentine Belt p/n size help? |
check local parts stores, i don't remember paying much more than 75 for mine, but they may have gone up a bit since last year oh, the belt + a tensioner for 80? that will probably be hard to beat, i think i paid more for the belt than i did for the tensioner, only 2 belts autozone had when i did mine was a 15 dollar belt, and then the big money gatorback belt |
|
| Author: | Daksport [ Thu Feb 25, 2010 1:37 am ] |
| Post subject: | Re: Serpentine Belt p/n size help? |
Check out rockauto.com. Looks like you can get the belt and tensioner for about $75. |
|
| Author: | SavageUrge [ Thu Feb 25, 2010 4:57 pm ] |
| Post subject: | Re: Serpentine Belt p/n size help? |
Daksport wrote: Check out rockauto.com. Looks like you can get the belt and tensioner for about $75. Thanks Daksport! Went to Rock Auto and got them for $83.16 (shipping was $7.58). I looked at Amazon and they cost $3 more and wouldn't ship until March 5th at the soonest! Since we're on the topic and I'm thinking about it, does anyone know what the torque value for the tensioner assembly is? Thanks again! |
|
| Author: | Daksport [ Thu Feb 25, 2010 5:22 pm ] |
| Post subject: | Re: Serpentine Belt p/n size help? |
Awesome!  I love ordering stuff from there because it usually saves me a ton of money, especially when I hear the words "dealer only". I was once told that the transmission oil cooler lines for my old Dakota were "dealer only" and were going to cost me $300 in parts alone to replace the send and return line. I ordered both lines from rock auto for about $60 shipped. Since then, it has been the first place I check for parts whenever something needs replaced. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|