It is currently Sun Aug 23, 2026 6:05 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Ughtt ohhh. Missing a nut for my front strut....
PostPosted: Thu Feb 25, 2010 1:09 pm 
Offline
LOST Addict
User avatar

Joined: Tue Jul 14, 2009 12:20 pm
Posts: 1881
Location: Orange Park, FL
So I'm missing a nut for my front rancho 17505.
I got them from JBA and the box had like 4 holes in it, Same with the other one. Good thing that one didn't fall out.
So what should I do? What size nut to I need?

_________________
'02 Jeep KJ 4x4- Gone
'92 YJ- lift, swampers, bumpers....yeah, its pretty sweet.
*DISCLAIMER*: I can not be held liable for anything I say on the forums or in real life.
I also can not be held liable for any jeep breakage or life problems caused due to my advice being taken.
:D


Top
 Profile  
 
 Post subject: Re: Ughtt ohhh. Missing a nut for my front strut....
PostPosted: Thu Feb 25, 2010 1:21 pm 
Offline
JACKRABBIT
JACKRABBIT

Joined: Sat Dec 13, 2008 4:26 pm
Posts: 3970
Location: Phoenix, AZ
maybe goto a hardware store and have them look at it and get one :D

_________________
Steve
2018 RAM 1500 Rebel
2003 KJ
Mods:Exterior: Frankenlift + 2 extra rear iso, JBA UCAs, ARB Bumper w/XRC8, Safari Snorkel, 265/75/16 AT, Mopar Skids, Boulderbars, RL Gecko Sport Rack
Interior: Infinity Reference speakers, 12" Alpine Type R Sub, Alpine radio, Gauge Pods (Oil, Volts), Cobra Cb, All J Interior Rack


Top
 Profile  
 
 Post subject: Re: Ughtt ohhh. Missing a nut for my front strut....
PostPosted: Thu Feb 25, 2010 1:26 pm 
Offline
LOST Addict
User avatar

Joined: Tue Jul 14, 2009 12:20 pm
Posts: 1881
Location: Orange Park, FL
Well the nut from the other one lookes like is an oval shape.

_________________
'02 Jeep KJ 4x4- Gone
'92 YJ- lift, swampers, bumpers....yeah, its pretty sweet.
*DISCLAIMER*: I can not be held liable for anything I say on the forums or in real life.
I also can not be held liable for any jeep breakage or life problems caused due to my advice being taken.
:D


Top
 Profile  
 
 Post subject: Re: Ughtt ohhh. Missing a nut for my front strut....
PostPosted: Thu Feb 25, 2010 1:35 pm 
Offline
JACKRABBIT
JACKRABBIT

Joined: Sat Dec 13, 2008 4:26 pm
Posts: 3970
Location: Phoenix, AZ
u installing the lift now??!?!

_________________
Steve
2018 RAM 1500 Rebel
2003 KJ
Mods:Exterior: Frankenlift + 2 extra rear iso, JBA UCAs, ARB Bumper w/XRC8, Safari Snorkel, 265/75/16 AT, Mopar Skids, Boulderbars, RL Gecko Sport Rack
Interior: Infinity Reference speakers, 12" Alpine Type R Sub, Alpine radio, Gauge Pods (Oil, Volts), Cobra Cb, All J Interior Rack


Top
 Profile  
 
 Post subject: Re: Ughtt ohhh. Missing a nut for my front strut....
PostPosted: Thu Feb 25, 2010 1:38 pm 
Offline
LOST Addict
User avatar

Joined: Tue Jul 14, 2009 12:20 pm
Posts: 1881
Location: Orange Park, FL
I was about to leave when I was making sure I had everything and then noticed the nut was missing.
I wonder If I could use the nut off the old strut.

_________________
'02 Jeep KJ 4x4- Gone
'92 YJ- lift, swampers, bumpers....yeah, its pretty sweet.
*DISCLAIMER*: I can not be held liable for anything I say on the forums or in real life.
I also can not be held liable for any jeep breakage or life problems caused due to my advice being taken.
:D


Top
 Profile  
 
 Post subject: Re: Ughtt ohhh. Missing a nut for my front strut....
PostPosted: Thu Feb 25, 2010 1:38 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Sat Apr 01, 2006 9:38 pm
Posts: 12988
Location: Colorado Springs
Budke wrote:
Well the nut from the other one lookes like is an oval shape.

That is a locknut,there are many versions where the ones that where supplied are just crushed so they look oval to prevent backing off.

If I remember they are a standard 3/8" course thread nut.Just go and get some 3/8" course thread grade 8 nuts and some washers.After putting the washer and nut on and tighten them thread on a second nut and lock against the 1st one,called double nutting(sounds bad :lol: ) but it's the poor mans locking nut and works very well.Just throw away the oval locknut for the other side(after getting the correct nuts).


Top
 Profile  
 
 Post subject: Re: Ughtt ohhh. Missing a nut for my front strut....
PostPosted: Thu Feb 25, 2010 2:28 pm 
Offline
LOST Addict
User avatar

Joined: Tue Jul 14, 2009 12:20 pm
Posts: 1881
Location: Orange Park, FL
So I do that on one side and use the oval on the other side? Or the double nut on both sides?

_________________
'02 Jeep KJ 4x4- Gone
'92 YJ- lift, swampers, bumpers....yeah, its pretty sweet.
*DISCLAIMER*: I can not be held liable for anything I say on the forums or in real life.
I also can not be held liable for any jeep breakage or life problems caused due to my advice being taken.
:D


Top
 Profile  
 
 Post subject: Re: Ughtt ohhh. Missing a nut for my front strut....
PostPosted: Thu Feb 25, 2010 6:05 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sun Feb 01, 2009 2:29 am
Posts: 5956
Location: Hillsborough, NC / Corolla NC
you can double nut on both sides, or.. the hardware store will have lock nuts too

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632


Top
 Profile  
 
 Post subject: Re: Ughtt ohhh. Missing a nut for my front strut....
PostPosted: Fri Feb 26, 2010 2:41 am 
Offline
LOST Addict
User avatar

Joined: Tue Jul 14, 2009 12:20 pm
Posts: 1881
Location: Orange Park, FL
I'm just gonna use the locking nut on one side and the double nut on the other.

_________________
'02 Jeep KJ 4x4- Gone
'92 YJ- lift, swampers, bumpers....yeah, its pretty sweet.
*DISCLAIMER*: I can not be held liable for anything I say on the forums or in real life.
I also can not be held liable for any jeep breakage or life problems caused due to my advice being taken.
:D


Top
 Profile  
 
 Post subject: Re: Ughtt ohhh. Missing a nut for my front strut....
PostPosted: Fri Feb 26, 2010 7:10 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Jul 16, 2005 10:46 am
Posts: 798
Location: Williamson, NY
What you should do is call JBA or Rancho and let them know you are misssing parts. I have no doubt they will send them to you at no charge. If you don't use the proper supplied parts you have no hope of a warranty. Just my :2cents:

_________________
2003 Renegade 4X4 5-Speed, Bright Silver *TRADED for 2013 Wrangler*
PIAA 520 Auxiliary Lights
Garmin GPSMAP 76S
DynoMax Ultra Flow SS Muffler
Amsoil Ea "Absolute Efficiency" Air Filter
Nokian Vatiiva 235/70/R16 Tires
Pixeldzn's "RENEGADE" decals
Support the 2nd Amendment - It's your right!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com