hooperswish wrote:
Diggerfreek wrote:
I have a PVC tube on the top of my rack....
X2
X3, one on either side of the rack that I put on during the season which is just about to kick off!
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Fishing Rod mounting http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=51937 |
Page 1 of 1 |
| Author: | Zack A [ Sat Apr 17, 2010 10:15 pm ] |
| Post subject: | Fishing Rod mounting |
Anyone have ideas on store fishing poles on the libby? I thought about making or finding something that could mounting behind the spare tire to hold the rods or on the roof?. I dont mind having them inside the jeep but wanted a few more ideas. |
|
| Author: | JeepinJarhead03 [ Sat Apr 17, 2010 10:37 pm ] |
| Post subject: | Re: Fishing Rod mounting |
i loaded 10 on my roof (i just have 2 2" square tubes across my rails) i put the neoprene handle under the rear tube and hooked 2 bunji together and snaked it from the front of the tube across the tops of the seat of the spools to the other rail to keep them back, then put another 2 bungi forward of the front tube to keep the tips from flailing it works in a pinch, no damage to the roof or to the rods if you have a rear hitch it's rather simple to put an insert in the rear with rod holders and strap the rods mid rod against the rear of the roof rails to prevent flailing can do the same in the front with a front hitch or something similar with spare leaders attached to the tips and strung to the rails |
|
| Author: | Diggerfreek [ Sun Apr 18, 2010 3:46 am ] |
| Post subject: | Re: Fishing Rod mounting |
I have a PVC tube on the top of my rack.... |
|
| Author: | hooperswish [ Sun Apr 18, 2010 5:35 pm ] |
| Post subject: | Re: Fishing Rod mounting |
Diggerfreek wrote: I have a PVC tube on the top of my rack.... X2 |
|
| Author: | Zack A [ Sun Apr 18, 2010 8:53 pm ] |
| Post subject: | Re: Fishing Rod mounting |
Thanks. I'm thinking of making something up using PVC that clamps to the side roof rails (not have crossrails). Mount the holders in the back and have them stick towards the front. I don't think they would fly out. |
|
| Author: | Sport [ Mon Apr 19, 2010 9:45 am ] |
| Post subject: | Re: Fishing Rod mounting |
hooperswish wrote: Diggerfreek wrote: I have a PVC tube on the top of my rack.... X2 X3, one on either side of the rack that I put on during the season which is just about to kick off!
|
|
| Author: | Zack A [ Mon Apr 19, 2010 9:55 am ] |
| Post subject: | Re: Fishing Rod mounting |
Any of yall mine taking some pics for me? I was thinking one on each side also. I'm off work tomorrow so I for see a projct if I can get some pics... |
|
| Author: | Sport [ Mon Apr 19, 2010 1:32 pm ] |
| Post subject: | Re: Fishing Rod mounting |
Click the link in my sig for my cardomain site. There are some pictures of it on the first page to give you and idea. It is a real simple solution using PVC and some ubolts to mount to the basket. I used those swing nuts so I can take them off quickly at the end of the season. |
|
| Author: | Zack A [ Mon Apr 19, 2010 1:49 pm ] |
| Post subject: | Re: Fishing Rod mounting |
what size PVC pipe did you use and what size u bolts. I might try attaching something to my rails. |
|
| Author: | Diggerfreek [ Tue Apr 20, 2010 12:57 am ] |
| Post subject: | Re: Fishing Rod mounting |
I used 4 inch PVC and use budge cords  
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|