I want to remove my rear tow point that I put on last summer and put a trailer hitch on. My dilemma is that I had to drill out the holes and broke one of the bits in the hole. My ex neighbor welded that part of the tow point on. What would be the best way to remove the tow point and get the bit out?

_________________
One Life - Live It

cut it off carefully with a die grinder cutting wheel, or a grinding burr

use a center punch and a hammer to knock the remainder of the bit through the hole if nothing is protruding

as far as getting a bolt back in that location, probably have to try to rethread it to a M14

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632