| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Clicking after pulley replacement http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=52998 |
Page 1 of 1 |
| Author: | Zack A [ Sat May 22, 2010 8:04 pm ] |
| Post subject: | Clicking after pulley replacement |
Hey guys, I replaced the tensioner today. Was going to change the belt to but got the wrong one from summit. Afterward when I started the jeep up it runs fine, except when the AC engages its starts the click. However it only clicks when at idle or when I first start to press the gas. After that it goes away. Engine and AC runs fine  Anyone got a clue as to what it is?TIA! |
|
| Author: | tjkj2002 [ Sat May 22, 2010 8:06 pm ] |
| Post subject: | Re: Clicking after pulley replacement |
Bad tensioner. Yep you got a bad one,happens more often then you think,getting "brand new" parts that are bad. |
|
| Author: | Zack A [ Sat May 22, 2010 8:37 pm ] |
| Post subject: | Re: Clicking after pulley replacement |
Why would it happen only when the AC kicks in. I get as close as I can to hear it and it sounds like its coming out of the AC compressor |
|
| Author: | Zack A [ Sat May 22, 2010 8:38 pm ] |
| Post subject: | Re: Clicking after pulley replacement |
At least the "squeaking" went away. 
|
|
| Author: | tjkj2002 [ Sat May 22, 2010 8:44 pm ] |
| Post subject: | Re: Clicking after pulley replacement |
Zack A wrote: Why would it happen only when the AC kicks in. I get as close as I can to hear it and it sounds like its coming out of the AC compressor It's the tensioner.While your looking at the tensioner have someone turn on the A/C(engine running) and you will see the tensioner arm start bouncing.It's the internal spring making the noise.The 2nd OEM tensioner the dealership installed started doing that same thing after about 5000 miles,replaced the tensioner with a Dayco one and the noise went away. |
|
| Author: | Zack A [ Sat May 22, 2010 8:48 pm ] |
| Post subject: | Re: Clicking after pulley replacement |
Yepp you can see it bounce some. Thanks. Sucks when you buy a new part and it fails before you can even use it. 
|
|
| Author: | tjkj2002 [ Sat May 22, 2010 8:51 pm ] |
| Post subject: | Re: Clicking after pulley replacement |
Zack A wrote: Yepp you can see it bounce some. Thanks. Sucks when you buy a new part and it fails before you can even use it. Yeah I now what you mean.Dayco and Gaterback tensioners are good and rather cheap.Stick with the serp belt from the dealership,they are worth the extra money and will get many more miles from the OEM EPDM serp belt then a aftermarket vinyl belts that crack fast. I just threw away a Gaterback serp belt with less then 10k miles that was already cracking and severly worn,replaced with a OEM EPDM belt. |
|
| Author: | JustinP [ Sat May 22, 2010 8:56 pm ] |
| Post subject: | Re: Clicking after pulley replacement |
Zack A wrote: Yepp you can see it bounce some. Thanks. Sucks when you buy a new part and it fails before you can even use it. This always sucks. Before i bought my KJ i bought lowering springs struts and shocks for my jetta, the right front strut blew out in less than a thousand miles of normal driving. Its such a disappointment in manufacturers quality sometimes. |
|
| Author: | hooperswish [ Sat May 22, 2010 11:21 pm ] |
| Post subject: | Re: Clicking after pulley replacement |
tjkj2002 wrote: Zack A wrote: Yepp you can see it bounce some. Thanks. Sucks when you buy a new part and it fails before you can even use it. Yeah I now what you mean.Dayco and Gaterback tensioners are good and rather cheap.Stick with the serp belt from the dealership,they are worth the extra money and will get many more miles from the OEM EPDM serp belt then a aftermarket vinyl belts that crack fast. I just threw away a Gaterback serp belt with less then 10k miles that was already cracking and severly worn,replaced with a OEM EPDM belt. DOH!!! I just put on a gatorback belt. They seemed to be highly rated.... |
|
| Author: | Zack A [ Mon May 24, 2010 6:14 pm ] |
| Post subject: | Re: Clicking after pulley replacement |
FIXED Bad tensioner as stated above. new part fixed the clicking. |
|
| Author: | JeepinJarhead03 [ Mon May 24, 2010 6:28 pm ] |
| Post subject: | Re: Clicking after pulley replacement |
my gators been on for, 30k hrmph.. time to replace it already? need to start driving less could just be i replaced the tensioner and belt at the same time |
|
| Author: | SavageUrge [ Tue May 25, 2010 2:59 pm ] |
| Post subject: | Re: Clicking after pulley replacement |
I replaced my OEM belt and tensioner for the first time after 110k+ miles with a Gatorback tensioner assembly (arm, mount and both pulleys purchased as one unit) and belt. Perhaps you need to use all the parts as a system. After I put it on, it ran just as smoothly as the day the Jeep was new. Now with about 2,000 miles on it, it's still purring beautifully. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|