LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/
Where can I buy a Brake Resevour cap? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=53093	Page 1 of 1

---

Author:	bugnout [ Wed May 26, 2010 4:06 pm ]
Post subject:	Where can I buy a Brake Resevour cap?
I'm building a pressure bleeder, need a cap. Can't seem to find just the cap anywhere.

---

Author:	AZKJ [ Wed May 26, 2010 11:14 pm ]
Post subject:	Re: Where can I buy a Brake Resevour cap?
Junkyard... dealership??

---

Author:	Jeep Dawg [ Sat May 29, 2010 9:48 am ]
Post subject:	Re: Where can I buy a Brake Resevour cap?
belive it or not but an auto store will sell things like that

---

Author:	Budke [ Sat May 29, 2010 9:48 am ]
Post subject:	Re: Where can I buy a Brake Resevour cap?
rockauto.com

---

Author:	dkcase [ Sun May 30, 2010 8:19 pm ]
Post subject:	Re: Where can I buy a Brake Resevour cap?
Original Poster, I'm with you. I've had the same question. I have a Motive bleeder but don't like having to clamp the cap on the master cylinder and crank down hard on the screws. Please, someone who responds that this is easy to find provide a part no. If it's at rockauto, show a link. I've looked there, and just did AGAIN -- I don't think so. Thanks.

---

Author:	tjkj2002 [ Mon May 31, 2010 10:09 pm ]
Post subject:	Re: Where can I buy a Brake Resevour cap?
Skip that type of pressure bleeding,a easier way............... http://www.brakebleeder.com/ http://www.tooltopia.com/phoenix-systems-maxpro-205.aspx

---

Author:	bugnout [ Wed Jun 02, 2010 10:21 pm ]
Post subject:	Re: Where can I buy a Brake Resevour cap?
Part number is 5072525AA. $13.30 from the dealer. There is a relief channel on the inside of the cap to equalize the pressure between the cap and the bellows. I'm going to have to fill it with epoxy so that it will fully seal and hold pressure.

---

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/