LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Portal Axle Ends
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=53254		 Page 1 of 2
Author:  jimymc [ Wed Jun 02, 2010 9:09 am ]
Post subject:  Portal Axle Ends
Portal axle ends for your KJ,KK? Five inch lift from axle ends?

http://comcast.vehix.com/articles/auto- ... h/?cid=800

WooHoo!!! :pepper:
Author:  Fulltimer [ Wed Jun 02, 2010 11:17 am ]
Post subject:  Re: Portal Axle Ends
I want the pickup!

Terry
Author:  jimymc [ Wed Jun 02, 2010 11:35 am ]
Post subject:  Re: Portal Axle Ends
Fulltimer wrote:
I want the pickup!

Terry


I thought you would say that.

Remember... Christmas is coming. :BANANA: :ROTFL:

Yeah, but wouldn't it be great if they had the portal axle ends to fit our Liberties? I think that is what they have on the military Hummers.
Author:  JL Rockies [ Wed Jun 02, 2010 11:42 am ]
Post subject:  Re: Portal Axle Ends
que tjkj2002 in 5...
Author:  jimymc [ Wed Jun 02, 2010 12:24 pm ]
Post subject:  Re: Portal Axle Ends
4...
Author:  tommudd [ Wed Jun 02, 2010 1:09 pm ]
Post subject:  Re: Portal Axle Ends
Going to need something a little bit more than the D30A to run the portals, also have you looked at the price yet :shock:
Author:  jimymc [ Wed Jun 02, 2010 1:32 pm ]
Post subject:  Re: Portal Axle Ends
tommudd wrote:
Going to need something a little bit more than the D30A to run the portals, also have you looked at the price yet :shock:


Tom,
I know the front diff is weak and I would have no idea to lift my Jeep an additional 5". It might work OK with a steel front diff and SFA.

I was just kiddin' around. :mrgreen:
Author:  Fulltimer [ Wed Jun 02, 2010 2:50 pm ]
Post subject:  Re: Portal Axle Ends
If only I had a rich relative! :lol:

Terry
Author:  tommudd [ Wed Jun 02, 2010 2:57 pm ]
Post subject:  Re: Portal Axle Ends
Fulltimer wrote:
If only I had a rich relative! :lol:

Terry


Maybe you do , they just don't claim you :ROTFL:
Author:  CRD Joe [ Wed Jun 02, 2010 6:38 pm ]
Post subject:  Re: Portal Axle Ends
tommudd wrote:
Going to need something a little bit more than the D30A to run the portals, also have you looked at the price yet :shock:


Actually one of the benefits of a portal design is that that portal end absorbs 50+% of the axles torque instead of the inner axles and ring and pinion. It makes the entire unit stronger. Now if youre talking D30 tube wall strength then thats another thing.
Author:  Fulltimer [ Wed Jun 02, 2010 7:34 pm ]
Post subject:  Re: Portal Axle Ends
tommudd wrote:
Fulltimer wrote:
If only I had a rich relative! :lol:

Terry


Maybe you do , they just don't claim you :ROTFL:


Have you been checking my family tree? You know the one...the NUT tree! :goink:

Terry
Author:  CRD Joe [ Wed Jun 02, 2010 8:08 pm ]
Post subject:  Re: Portal Axle Ends
Where did you see anything related to pricing on those portal axles?
Author:  tjkj2002 [ Wed Jun 02, 2010 10:30 pm ]
Post subject:  Re: Portal Axle Ends
Those won't work with the IFS,only SFA.

Oh and you can't use the HMMWV portals on a KJ either due to the 2 gear design.
Author:  tommudd [ Wed Jun 02, 2010 10:44 pm ]
Post subject:  Re: Portal Axle Ends
CRD Joe wrote:
Where did you see anything related to pricing on those portal axles?


There was a discussion on another forum I am on regarding pricing/ good / bad points etc.
Author:  linewarbr [ Wed Jun 02, 2010 10:50 pm ]
Post subject:  Re: Portal Axle Ends
tjkj2002 wrote:
Those won't work with the IFS,only SFA.

Oh and you can't use the HMMWV portals on a KJ either due to the 2 gear design.


Booooooooooo. Buzz Killington.
Author:  curt7088 [ Fri Jun 04, 2010 1:16 pm ]
Post subject:  Re: Portal Axle Ends
Why would they not work on a kj??? I mean a hwmmv is ifs and irs... but they use them.. what is the difference between the setup on one of them and a kj, well besides theirs is much more beefy?... just asking, because I would love to do the steel front diff and the portals... there is also a company that mmakes bolt on portals but they only work on solid axles... can't remember the name of the company...
Author:  tjkj2002 [ Fri Jun 04, 2010 3:45 pm ]
Post subject:  Re: Portal Axle Ends
curt7088 wrote:
Why would they not work on a kj??? I mean a hwmmv is ifs and irs... but they use them.. what is the difference between the setup on one of them and a kj, well besides theirs is much more beefy?... just asking, because I would love to do the steel front diff and the portals... there is also a company that mmakes bolt on portals but they only work on solid axles... can't remember the name of the company...

You could mod them and install the HMMWV portals in the front of a KJ,one problem is that they are a 2 gear design so the portal output spins backwards then the input does,so after blowing apart your t-case trying to go nowhere you'd understand.If you ever see a HMMWV drive forward and look at the CV axles they are actually spinning backwards to move forward.They use special modified AMC20 housing that spin in reverse to use the 2 gear portal design.

You need the 3-4 gear design to work on any vehicle not properly modified to use a 2 gear design,plus the 3-4 gear desgin is alot more $$$ and far weaker then the 2 gear design,and I mean alot weaker also.
Author:  RED_KJ_666 [ Sat Jun 05, 2010 11:28 am ]
Post subject:  Re: Portal Axle Ends
The answer is Ford Tractor Axles and 4 wheel steering lol
Author:  Budke [ Sat Jun 05, 2010 12:57 pm ]
Post subject:  Re: Portal Axle Ends
RED_KJ_666 wrote:
The answer is Ford Tractor Axles and 4 wheel steering lol


I like the way this dude thinks. :twisted:
Author:  Neatus [ Sat Jun 05, 2010 10:53 pm ]
Post subject:  Re: Portal Axle Ends
Did any of you watch the You Tube vid under the article? Did ya see the Ram Runner and the Jeep Kaiser concepts? bad arse! I want one of each!
Image
Image
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/