| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| LED http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=54023 |
Page 1 of 1 |
| Author: | mrneen [ Sun Jul 04, 2010 10:28 pm ] |
| Post subject: | LED |
Does anyone know the part number that i would need if i was to convert my overhead interior light to LED? (part number) i think if i did this right i am looking for a 44mm bulb?? i am trying to make the interior brighter. haha Thanks |
|
| Author: | riptricket [ Mon Jul 05, 2010 5:20 am ] |
| Post subject: | Re: LED |
42mm go ebay cheap china parts.. less than $10 shipped does the entire inside of the KJ |
|
| Author: | mrneen [ Mon Jul 05, 2010 2:30 pm ] |
| Post subject: | Re: LED |
thanks for the reply.. is it a certain style LED bulb i need for the 42mm? thanks again |
|
| Author: | mrneen [ Mon Jul 05, 2010 3:40 pm ] |
| Post subject: | Re: LED |
i am biddin on a set of LED bulbs from Hong Kong.... they are 42mm by 11mm wide. these should fit right? they are only $1 for 2 of them... and shipping is only like $2. not to bad.. i guess they are 'super white' also |
|
| Author: | riptricket [ Mon Jul 05, 2010 3:41 pm ] |
| Post subject: | Re: LED |
just like this... http://cgi.ebay.com/Car-Interior-Dome-6-LED-Bulb-Light-Festoon-Lamp-42mm-/300442691213?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item45f3c7a68d can have 6 or 8 led but needs to be thast size |
|
| Author: | riptricket [ Mon Jul 05, 2010 3:47 pm ] |
| Post subject: | Re: LED |
yes that will work! |
|
| Author: | mrneen [ Mon Jul 05, 2010 4:07 pm ] |
| Post subject: | Re: LED |
riptricket wrote: just like this... http://cgi.ebay.com/Car-Interior-Dome-6-LED-Bulb-Light-Festoon-Lamp-42mm-/300442691213?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item45f3c7a68d can have 6 or 8 led but needs to be thast size exactly like that.... only these come in a package of 2 thanks for all the help!!! can't wait to get them is the rear cargo area light the same thing? 42mm by 11mm wide? i assume they are easy to replace also, no? |
|
| Author: | riptricket [ Tue Jul 06, 2010 2:39 am ] |
| Post subject: | Re: LED |
yes same led |
|
| Author: | bmrrwolfe [ Tue Jul 06, 2010 10:13 am ] |
| Post subject: | Re: LED |
I run those cheap ones, be sure to get some extras! I had one burn out two of the LEDs for the front so the company replaced the set for free and haven't had a problems with the fronts since, and the back ones I've burned out one completely and the second one only has 4 of the 8 LEDs left... Not to sure whats going on with the back light but it burns the bulb up quick. Oh and be prepared to have constant overhead lights on now. The LEDs run at such a low voltage they stay on (but very dim) as long as the Jeep is on. It looks kinda cool at night though. |
|
| Author: | riptricket [ Tue Jul 06, 2010 10:26 am ] |
| Post subject: | Re: LED |
mine have been in for a couple of months and I have had no problems. |
|
| Author: | mrneen [ Sat Jul 24, 2010 10:19 pm ] |
| Post subject: | Re: LED |
so i bought them... and they were not the right part... i need the map lights.. any one have the map lights and converted them to LED's? |
|
| Author: | riptricket [ Sun Jul 25, 2010 2:02 am ] |
| Post subject: | Re: LED |
yeah 42mm |
|
| Author: | mrneen [ Sun Jul 25, 2010 4:15 pm ] |
| Post subject: | Re: LED |
riptricket wrote: yeah 42mm are the 42mm the same style bulb as the OEM?.... the 'plug in kind'? |
|
| Author: | JeepinJarhead03 [ Sun Jul 25, 2010 6:24 pm ] |
| Post subject: | Re: LED |
it's fairly easy to kill off the after glow for led int. lights, since they're all on a common feed, it's just one tap and you're done |
|
| Author: | Clyde Frog [ Mon Jul 26, 2010 5:19 pm ] |
| Post subject: | Re: LED |
mrneen wrote: so i bought them... and they were not the right part... i need the map lights.. any one have the map lights and converted them to LED's? The map lights in the front are different from the cargo lights in my 03 Renne. I have an the overhead computer thing though, so I don't know if your's might be different. But anyway, I bought http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220622371397&ssPageName=STRK:MEWNX:ITto replace my map lights. I haven't installed them yet so I can't I'm for or against them yet. Haven't had the time to pull the overhead console out and yank the bulbs. |
|
| Author: | jslibby [ Mon Jul 26, 2010 9:54 pm ] |
| Post subject: | Re: LED |
dont order anyting from hong kong |
|
| Author: | Clyde Frog [ Tue Jul 27, 2010 9:21 pm ] |
| Post subject: | Re: LED |
Depends on what it is, I guess. I've had great results with LEDs from China. |
|
| Author: | jslibby [ Wed Jul 28, 2010 5:05 pm ] |
| Post subject: | Re: LED |
i haven't been so lucky with anything from hon kong |
|
| Author: | JL Rockies [ Wed Jul 28, 2010 7:06 pm ] |
| Post subject: | Re: LED |
Did I click on the electronics tab by accident??? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|