Just bought new armour-all wipers because my old ones were starting to streak.

Put them on and it left a huge smear right in the middle where the wiper didn't even contact. These are the framesless type.

Took em back and got the same ones I had before and they work better but it still seems there is a little right in the middle where the arm is attache dto the wiper where it doesn't clear the water. There is simply not enough pressure.

How can I fix this?

Help!

_________________
2005 Liberty Renegade
Old Man Emu HD Coils, OME Struts, OME Shocks
Tow Package with Champion Receiver Shackle
RB1 Navigation
245/75R16 Goodyear Duratrac's (Installed November 24, 2010
Slightly Trimmed Front Bumper and Wheel Well Liner
Pinch Weld Pounded
Custom Rock Rails
Rock Crusher Diff Cover (Not installed)

Wiper arm could be bent, check that. Had the same issue on an XK.

_________________
05 KJ Limited 4x4 in Light Khaki: Detours USA Backbone, Warn M8000, Huskyliners, RockLizard Super Skink sliders, OME/Bilstein Lift, JBA UCA's, 245/70/17 Nitto Terra Grapplers
07 LR3 SE V8
1996 XJ Country
2015 KL Limited