reinstalling front fender flare

peebut · **Joined:** Thu Dec 22, 2005 2:05 pm **Posts:** 37

The libby hit a guard rail and the flair popped off. (sounds like a song) Anyway I got some plastic rivets and reinstalled it and it fell off going down the highway. After reading some posts I see there is supposed to be a clip that also holds it on??? I didn't see no clip. Any idea where this mystery clip goes and where I can get it. Also the NAPA # is 7702871 right?? I may just end up screwing the flare to the body but would rather not. Thanx

MattyMac1 · **Posted:** Fri Feb 03, 2006 4:38 pm

Quote:

I didn't see no clip

If there is "no clip" to see, how would you ever see it?

Did You mean to write I didn't see any clips? I'm only kidding, just wasting time at work.. :lol:

bennybmn · **Posted:** Fri Feb 03, 2006 7:58 pm

Yeah there are some little clip type things that pop into the bumper/from end in the lower part of the flair. They slide into some slots in the flair. I wouldn't know what to call it... You sure you got big enough rivets? I would think they would hold it on...

uvalax236 · **Posted:** Fri Feb 03, 2006 8:15 pm

There are a bunch of clips that you have to install on the inside of the flare. With the flare off, you have to push the clip into the slot on the flare. Once all those are on, pop the flare back onto the body. Finally, take a rivit gun and rivit the wheel well back on (If your running them). Sorry if it is not detailed enough, I am tired from work.

peebut · **Joined:** Thu Dec 22, 2005 2:05 pm **Posts:** 37

But where can I get the plastic clips. From Napa or the Stealership. Any # from Napa??

bennybmn · **Posted:** Sun Feb 05, 2006 8:02 pm

I honestly don't know... hopefully someone else has done it already and can tell you.

reinstalling front fender flare

Who is online