I have my front two wheels off, I am pretty sure my bearings need greasing bcz of the sound they are making.

How do I grease my bearings. I cant find the Zurk Fitting. Idk what to do now.
ANY HELP PLEASE. Gotta get it done soon.

_________________
Silver 2002 Liberty Sport
Couple of Mods
Many future Mods to come...

..==oooo
/_|_\===\
[==[ ]--|ollllllo|
()_).....()_)-o-)_)..
LIBBY!

There are no zerks as the front bearings are not serviceable as you must replace as a whole unit to "grease" them.

If your bearings are making noise they need replaced. Are you sure its not brakes or somethin else?

Im not sure.
All i can hear is an extremely high pitched screech from the from of the jeep after the i drive it for more than 15 mins.
It gets louder when i turn and stop

Any ideas?

_________________
Silver 2002 Liberty Sport
Couple of Mods
Many future Mods to come...

..==oooo
/_|_\===\
[==[ ]--|ollllllo|
()_).....()_)-o-)_)..
LIBBY!

Check your brakes while you got the wheels off

I just had my brakes done professionally. i didnt hear the sound until i went to the dunes

_________________
Silver 2002 Liberty Sport
Couple of Mods
Many future Mods to come...

..==oooo
/_|_\===\
[==[ ]--|ollllllo|
()_).....()_)-o-)_)..
LIBBY!

If you haven't done it pull everything apart brake wise in the front, use brake cleaner and spry everywhere and make sure no dirt/sand is left around anything. Thats one of the "fun parts" playing in sand ( or mud for that matter) it can get up into places that you would never think it could and make a tremendous racket

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

CV Boots look OK?
Rear Brakes overly tight?

_________________
2005 Renegade
Light Khaki
Bone Stock (For Now)