so i took down measurements for a new drive shaft to be made and need either another measurement or to know if the flanges are the same between the KJ and KK and the command-trac and select-trac transfer case. im looking for the pilot diameter on the transfer case flange. the male portion is 3/4" but apparently i need the female portion also. i dont want to have to pull my drive shaft again to measure otherwise i would do it myself. the condo complex doesnt allow doing maintenance in the parking lot and i work graveyard so its a royal pain.

internet cookie for the person of most help

well guess what i just realized...

kj doesnt have a flange