| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Home made cross bars http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=56089 |
Page 1 of 1 |
| Author: | LibertyCRD [ Thu Oct 07, 2010 1:44 pm ] |
| Post subject: | Home made cross bars |
Somebody on the forum made some cross bars that would fit the OEM KJ roof rails by simply gathering materials from the fencing section at Lowe's. They used sections of chain link fencing post, along with post couplings as brackets, to construct cheap and simple cross bars. Who was that? And, if they read this.. do you have pics/info. on that project? |
|
| Author: | tommudd [ Thu Oct 07, 2010 1:52 pm ] |
| Post subject: | Re: Home made cross bars |
maybe look in the fabrication section been done several different ways |
|
| Author: | JeepinJarhead03 [ Thu Oct 07, 2010 1:54 pm ] |
| Post subject: | Re: Home made cross bars |
I remember that, don't remember who it was sorry  however, several of us have gone the U bolt route combined with 2x2ish square aluminum with equally as cheap costs with excellent results fence posts can be found in 48" lengths im sure, the aluminum, well I got mine in 100something length, cut a 12" piece off, then cut the rest in half |
|
| Author: | LibertyCRD [ Thu Oct 07, 2010 3:21 pm ] |
| Post subject: | Re: Home made cross bars |
Found it. Thanks. |
|
| Author: | ga_repoman [ Thu Oct 07, 2010 4:27 pm ] |
| Post subject: | Re: Home made cross bars |
i used the fence material for my cross bars coated the ends with rubber coating before installing |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|