| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Torque setting http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=56373 |
Page 1 of 1 |
| Author: | JIMMY JEEP [ Wed Oct 20, 2010 12:59 pm ] |
| Post subject: | Torque setting |
Anyone know the torque setting for the wheels in NM ?Thanks. |
|
| Author: | JustinP [ Wed Oct 20, 2010 1:04 pm ] |
| Post subject: | Re: Torque setting |
Im not sure what the KJ specifically calls for, but as a standard I learned, Ive always torqued mine to 80ft/lbs, which according to google is 108.5 NM. |
|
| Author: | ATXKJ [ Wed Oct 20, 2010 8:50 pm ] |
| Post subject: | Re: Torque setting |
05 Owners Manual Quote: Correct wheel nut tightness is 130 N·m (95 ft. lbs)
|
|
| Author: | tjkj2002 [ Thu Oct 21, 2010 12:36 am ] |
| Post subject: | Re: Torque setting |
ATXKJ wrote: 05 Owners Manual Quote: Correct wheel nut tightness is 130 N·m (95 ft. lbs) Mine states between 85-115lbs-ft of torque for the lugnuts. |
|
| Author: | LI_KJ [ Thu Oct 21, 2010 12:58 am ] |
| Post subject: | Re: Torque setting |
tjkj2002 wrote: ATXKJ wrote: 05 Owners Manual Quote: Correct wheel nut tightness is 130 N·m (95 ft. lbs) Mine states between 85-115lbs-ft of torque for the lugnuts. 100lbs, and call it good. Too much torque and you can strip theM out or if the lugs are capped, then you will just pull the cap off. Then it's time for a vice grip! |
|
| Author: | JIMMY JEEP [ Thu Oct 21, 2010 5:16 pm ] |
| Post subject: | Re: Torque setting |
Thankyou for your replies. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|