OK, here's the details now that I've had to to play with it
- The left middle steering wheel button will not take you through the presets, you have to use the buttons on the unit.
- The song/artist does not show up on the bottom of the RB1 screen. You have to use the tune button to scroll through them. (ie, you scroll through the channel name, artist, and song) I'm going to contact Terk about this.
But, I got Fox News back, so I'll take the differences, even though I prefer the way things displayed before.
Installation
- When you pull the head unit, stick your hand inside the opening to the right. There's a flat plastic surface that works well for the converter. Use Velcro Extreme or 3M Dual Lock, and it should stay there. The wires will fit with some coercing.
- For the receiver itself. When you remove the glove box, there's another flat plastic surface on the right, and the receiver will Velcro there as well. However, note that I had to break off the right latch on the glove box itself for it to close properly. Not everyone may want to do this, but I was running out of spaces, patience, and time.
The wires will run from the converter to the receiver without interfering with the golve box.