Okay so tonight I thought... trial run to see how long it would take to fix a flat.
Well not a great idea.
first of all... the hilift jack part messed up my line-x on the RL rails.
second of all... I am tired!

So what's an easy way to not screw up my line-x on the rails but still jack from them?

Thanks in advance!

No,why it's not a good idea to linex them,they will get messed up if you wheel it.

ARB bumpers have a hi lift jack point.... or you can get those hi lift wheel hook deals and lower the KJ onto a jack stand. I use the hooks on my RL bumper... not sure it that would work on those aluminum jobs though.

_________________
2006 CRD http://www.UtahPowderCoatings.com/ http://www.gorecon.com/ I'm kind of a big deal.
RL rear bumper, ARB front bumper, Mile Marker winch, Power Tank, Skids by Mopar & Skid Row, RL Super Skink Sliders, 235/85R16 MTR, Air Flow Snorkel, DTT, 4.10 gears, Frankenlift II, Katskin leather, JL Audio stereo, Rosen video.

Check with Dave or Yoshi at http://www.trasharoo.com
they are selling a Hi Lift adaptor that Overland XT makes
its 59.99 but a slick piece works on rock rails
have to go to "click on order today, scroll to bottom of that page to be taken to the webstore
it's a slick piece though
Now it will still scratch them since the Line X is a bad idea as has been said before but this will help

tell them I sent ya!

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

whats the best thing to use on the RL rails then other than bedliner?

_________________
'02 Liberty Limited 4x4
-Selec Trac
-MTR's 245/75-16
-Rock Lizard Super Skink Sliders(custom)
-Engine skid, Skidrow Transmission skid
-4" Lift - JBA 4.5 Gen A-arms
Installed@165,920k
Pilot lights on cowl
Engine replacement at 175k

Hammertone paint, looks good, last a long time, and best of all easy to touch up
Rockrails are going to get scratched and gouged so no use wasting money Line X ing them or powder coating

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

alright hmm, now what color to use.. ill have to check my options, or any suggestions for blue kj?

did you sand them before hand or? just spray it right on?

_________________
'02 Liberty Limited 4x4
-Selec Trac
-MTR's 245/75-16
-Rock Lizard Super Skink Sliders(custom)
-Engine skid, Skidrow Transmission skid
-4" Lift - JBA 4.5 Gen A-arms
Installed@165,920k
Pilot lights on cowl
Engine replacement at 175k

man that really sucks about them getting scratched up that easily...
I feel like an idiot, but considering I got the rear and rails shot for only $150 it wasn't that bad.
Also, I have found that using plasticote in a can makes a pretty good match for the coating when it it gone.