| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Autometer Gauge http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=58294 |
Page 1 of 1 |
| Author: | STINGN [ Mon Jan 17, 2011 7:35 pm ] |
| Post subject: | Autometer Gauge |
I just got me a oil pressure gauge and before i look for it, where is the oil pressure sensor on the liberty? i need to replace it with the one that came with it. and also, do i need to change the oil when i do this or can i just pop it off and put it on? I will be doing a write up on this when i get it done in case anyone else wants to do it Thanks, Steve |
|
| Author: | Ristin [ Mon Jan 17, 2011 8:02 pm ] |
| Post subject: | Re: Autometer Gauge |
From what I read in another post, the oil sender is by the oil filter. Kinda behind it IIRC. I think you have to install a tee fitting and run the stock sender and the after market unit. Think a fault code pops up or something if the ecm doesn't receive a signal from the oil sender. Was a while ago when I read the HOW TO: post on installing the after market unit. Decided it was more work than I wanted to do. |
|
| Author: | Liberty02sport [ Mon Jan 24, 2011 3:10 am ] |
| Post subject: | Re: Autometer Gauge |
The oil sending unit is directly above the oil filter, right on the front. should take you about 20 min. to remove and reinstall it. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|