Got a floor jack and a few 4x4s right now for emergencies. Hi-Lift is "high" on my list as it will give me some light winching capabilities with the ability to change my rubber out.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Lifted with OME...is the factory jack still long enough? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=58456 |
Page 1 of 1 |
| Author: | surfRenegade [ Mon Jan 24, 2011 12:24 pm ] |
| Post subject: | Lifted with OME...is the factory jack still long enough? |
Ok guys, Im just trying to be prepared for my cross country drive again. Recently got lifted with OME springs Blistein shocks. As much as I would enjoy going out in the -5 degree temps with snow and see if I change change a tire using the factory emergency jack, I was wondering if any of you guys knew if it will still be long enough to jack the jeep up and change a tire incase I get a flat along my drive. If not what can I carry along with me thats small enough to slide under a seat like that and still be a useful jack? Thanks Sam |
|
| Author: | ptsb5a [ Mon Jan 24, 2011 12:51 pm ] |
| Post subject: | Re: Lifted with OME...is the factory jack still long enough? |
A couple of chunks of 2x8, stacked will give you a 3" boost. |
|
| Author: | Zinger [ Mon Jan 24, 2011 4:02 pm ] |
| Post subject: | Re: Lifted with OME...is the factory jack still long enough? |
ptsb5a wrote: A couple of chunks of 2x8, stacked will give you a 3" boost. Agreed^^^. I always keep a couple in the cargo area. |
|
| Author: | bunkermonkeycw [ Mon Jan 24, 2011 4:16 pm ] |
| Post subject: | Re: Lifted with OME...is the factory jack still long enough? |
Got a floor jack and a few 4x4s right now for emergencies. Hi-Lift is "high" on my list as it will give me some light winching capabilities with the ability to change my rubber out.
|
|
| Author: | H0USE34 [ Mon Jan 24, 2011 4:23 pm ] |
| Post subject: | Re: Lifted with OME...is the factory jack still long enough? |
Bottle Jack from a TJ works great. But having something solid(block of wood) as a base is a must especially when on the trails. |
|
| Author: | tommudd [ Mon Jan 24, 2011 5:12 pm ] |
| Post subject: | Re: Lifted with OME...is the factory jack still long enough? |
Something to think about first what size tires do you have most go with 245-75-16s so they are lets say about 31 inches tall, stock are 29 so you have raised the area that you use your jack one inch, thats all so yes you may need a couple of 2 X 8s but that about it, one to block with one for the jack |
|
| Author: | JeepinJarhead03 [ Mon Jan 24, 2011 5:25 pm ] |
| Post subject: | Re: Lifted with OME...is the factory jack still long enough? |
2x8 or 2x10 pressure treated under the jack, and a 4x4 ~ 8" long works good since I don't have a factory jack I carry 2 jackstands + a floor jack so the floor jack has wheels, i drilled holes in the 2x10 so the wheels of the jack would drop down in them to prevent it from rolling on the board - works great |
|
| Author: | STINGN [ Mon Jan 24, 2011 5:28 pm ] |
| Post subject: | Re: Lifted with OME...is the factory jack still long enough? |
JeepinJarhead03 wrote: 2x8 or 2x10 pressure treated under the jack, and a 4x4 ~ 8" long works good since I don't have a factory jack I carry 2 jackstands + a floor jack so the floor jack has wheels, i drilled holes in the 2x10 so the wheels of the jack would drop down in them to prevent it from rolling on the board - works great ok...next meet, i need to see how you carry all of this 
|
|
| Author: | JeepinJarhead03 [ Mon Jan 24, 2011 5:48 pm ] |
| Post subject: | Re: Lifted with OME...is the factory jack still long enough? |
Fair enough 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|