no he said thats just parts per side
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| help with wheel bearings http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=58980 |
Page 1 of 1 |
| Author: | steve03sport [ Thu Feb 17, 2011 9:50 pm ] |
| Post subject: | help with wheel bearings |
my wheel bearing are starting to go.... not sure what side it is but they are getting loud, anyone have a brand they would go with? Tom ? the mechanic tried to sell me some today saying 325$ per side i said BShe said that was for timkin wheel bearings with ABS. Q is does my jeep have ABS? and i found timkins on ebay for 270 a pair. also found others for 150$ a pair. help me out guys |
|
| Author: | tommudd [ Fri Feb 18, 2011 12:09 am ] |
| Post subject: | Re: help with wheel bearings |
check rockauto as well they are sort of expensive but can be had for less than what was quoted was they installed ? |
|
| Author: | steve03sport [ Fri Feb 18, 2011 1:04 pm ] |
| Post subject: | Re: help with wheel bearings |
no he said thats just parts per side
|
|
| Author: | tonycrd [ Fri Feb 18, 2011 2:07 pm ] |
| Post subject: | Re: help with wheel bearings |
steve03sport wrote: Q is does my jeep have ABS? Tried braking real hard?  Open the hood. Look under the master brake cilinder (the thing with the white fluid container on top of it) if you see nothing, you have no ABS. If you see a black box with a bunch of metal pipes connected to it, you have ABS. Or, turn the wheels to full lock and look. If there is a black wire running from the inside of the wheel towards the engine compartment..you have ABS. I have seen wheelbearings for the KJ for as little as $50 on Ebay... Here you go http://shop.ebay.com/i.html?_nkw=jeep+l ... ing&_rdc=1 |
|
| Author: | METCRD [ Fri Feb 18, 2011 3:04 pm ] |
| Post subject: | Re: help with wheel bearings |
One way to determine which side the bad bearing is on is by the use of a long soft turn kind of like an interchange ramp. As you are going around the turn (if it is soft enough of a turn) you can kind of swerve to the inside of the turn to see if the noise gets louder or quieter. I don't mean yank the wheel but gently turn almost like changing lanes. If it gets louder while turning into the curve then it is the outside (relative to the turn) bearing. If it quiets down then it is the inside (again relative to the turn) bearing. What is happening during this testing method is you are taking some weight of the inside bearing so if it is the bad one the humming will quiet down. If the bad bearing is the outside bearing then it will get pronouncedly louder as you turn into the corner because you are loading more weight on the bearing. It has worked for me in the past. You can wait until they begin to get real loud and it makes deciphering which side much easier. Good luck. |
|
| Author: | steve03sport [ Fri Feb 18, 2011 4:51 pm ] |
| Post subject: | Re: help with wheel bearings |
it quiets down when i turn the wheel to the left if im driving straight and turn wheel left a bit it quiets |
|
| Author: | METCRD [ Fri Feb 18, 2011 5:38 pm ] |
| Post subject: | Re: help with wheel bearings |
That sounds like the left side to me |
|
| Author: | steve03sport [ Mon Feb 21, 2011 9:04 pm ] |
| Post subject: | Re: help with wheel bearings |
links to bearing to buy? mid price i hope lol |
|
| Author: | tonycrd [ Wed Feb 23, 2011 10:46 am ] |
| Post subject: | Re: help with wheel bearings |
tonycrd wrote: I have seen wheelbearings for the KJ for as little as $50 on Ebay... Here you go http://shop.ebay.com/i.html?_nkw=jeep+l ... ing&_rdc=1 
|
|
| Author: | steve03sport [ Wed Feb 23, 2011 8:23 pm ] |
| Post subject: | Re: help with wheel bearings |
any of those better than others? i think im gonna get a pair and do both at same time but now sure what ones to get |
|
| Author: | flman [ Thu Feb 24, 2011 3:13 pm ] |
| Post subject: | Re: help with wheel bearings |
I have been having the same problem myself and I notice it quiets down on a right turn, now how do you know if it is the front or rear? I jacked the vehicle one side at a time and put in in gear. I am thinking it is the rear bearing, but the sound is not very pronounced when it is jacked up and free wheeling. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|