went to replace my rear shocks and the top mounts on the shocks don't have the metal insert in the bushing.

does anyone know where to get them or what to use??

jeep is sitting apart in the garage right now

Sent from my Droid using Tapatalk

_________________
04 Liberty Sport 4x4;
3.7L V-6
Amsoil Filter
Rusty's 2.5in Lift
Lund Air Deflector
Hella 500 Series Lights (6)
Sirius Sat. Radio; Garmin GPS System
Amer. Racing ATX Chamber w/Teflon; Goodyear Wrangler Silent Armor 265/70/16

Would need to know what rears you are using just in case you're a unique case... but most rears we use here have an LS28 type mount 12mm inside diameter / 1 5/8" width.

Any 12mm I.D. metal cored bushing would probably do if the width fits your shock's mounts.

Why'd your shocks not have any just out of curiosity?

_________________
Huntbuggy
02 KJ Sport Silver - 2.5" OME/Bilstein lift, ARB bumper, JBA 4.5s, full factory skids, RS diff cover, rear SuperBumper on Reese 2", 245/75R16 on Cragars

I got these shocks per the threads on this forum:

F4-BE5-6458-H7 Bilstein 5100 Offroad Racing Unit

My friend and I were able to find steel tubing at Home Depot that fit inside and had the right inner diameter for the bolt so were okay now.

But I was just curious if anybody else's Bilstein's didn't come with the bushing inserts?

_________________
04 Liberty Sport 4x4;
3.7L V-6
Amsoil Filter
Rusty's 2.5in Lift
Lund Air Deflector
Hella 500 Series Lights (6)
Sirius Sat. Radio; Garmin GPS System
Amer. Racing ATX Chamber w/Teflon; Goodyear Wrangler Silent Armor 265/70/16