multi-function switch or hazard switch

arengant · **Posted:** Mon Apr 04, 2011 10:08 pm

I was driving today in the rain (as usual here) with head/fog lights on. Turning left with signal, and then it just stopped flashing. The whole trip home I couldn't get the left signal to work again (no flashing noise, no illumination on dash, no illumination of actual bulb outside) but the right side works fine. When I tried my hazards, ONLY the right side illuminated (dash/outside).

By the time I got home the signal was working again out of no where....

After looking on here, I narrowed it down to the multi-function switch, or hazard switch. Neither are as cheap as the traditional blinker switch, so if anyone has experience this and knows for sure that would save me 50 bucks

irollgen4s · **Posted:** Mon Apr 04, 2011 10:12 pm

Ever think that the bulb is just bad....? Most cars blink really fast, or stop blinking entirely.. unless you mean the switch doesnt activate anything at all.

arengant · **Posted:** Tue Apr 05, 2011 11:06 pm

I recently replaced the rear, but because the other side does NOT blink faster, I thought it wouldn't be the bulb. Won't be too hard to check the front though.

I am leaning towards the Hazard. The multi-function just sends a signal to the flasher (Hazard), either left or rigth. However, when I try just engaging the Hazards, ONLY the right side illuminates, on the dash and out side markers.

multi-function switch or hazard switch

Who is online