tommudd wrote:
Check with BugginKJ
he mounted LEDs in the fog light holes for running and turn signals
he mounted LEDs in the fog light holes for running and turn signals
BugginKJ do a write up....can he even write?
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| front turn signal mod http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=61543 |
Page 1 of 1 |
| Author: | scout [ Thu Jul 07, 2011 8:02 am ] |
| Post subject: | front turn signal mod |
Does anyone have a write up on moving the front turn signals to the stock fog light location? |
|
| Author: | tommudd [ Thu Jul 07, 2011 8:11 am ] |
| Post subject: | Re: front turn signal mod |
Check with BugginKJ he mounted LEDs in the fog light holes for running and turn signals |
|
| Author: | Megalos [ Thu Jul 07, 2011 9:40 am ] |
| Post subject: | Re: front turn signal mod |
tommudd wrote: Check with BugginKJ he mounted LEDs in the fog light holes for running and turn signals BugginKJ do a write up....can he even write?
|
|
| Author: | BugginKJ [ Thu Jul 07, 2011 10:35 am ] |
| Post subject: | Re: front turn signal mod |
Megalos wrote: tommudd wrote: Check with BugginKJ he mounted LEDs in the fog light holes for running and turn signals BugginKJ do a write up....can he even write? Only with crayons and really wide markers, that of course are washable It's really easy Scout. Whatever lights you are going to use is what is going to determine your mounting bracket for the light in the fog light housing hole. The lights I used have a rear stud mount with the wires for the lights coming out the post for the stud on the rear of the light. so fabbing up a "u" style bracket was a breeze to mount the lights in the holes. If you want your lights to be markers and turns they must be 3 wire. I can't tell you what the color code is because I just used my circuit tester to determine the wires from the harness for the side marker and front turn/marker light. I did use the side marker harness (194 bulb) for my LED side markers I put into my flares, that's just 2 wire, hot and ground. The front is where I spliced in a 3 wire harness for my front LED marker/turns. Off my light I can tell you red is the turn signal, black is the marker and white is the ground, what the colors are from the factory harness I don't know(I have them shrink wrapped and taped neatly in conduit). Like I said I used my circuit tester but if ya know electrical it is very easy. I may be able to get Tom to snap and post some pics with my grille off for ya when I get over to his place, my regular pc is still getting fixed. 
|
|
| Author: | scout [ Thu Jul 07, 2011 2:05 pm ] |
| Post subject: | Re: front turn signal mod |
Thanks for the reply. I figured it was easy and was thinking about using the JK turn signals. Im not sure if its a perfect fit but they look close. If you do add a picture that would be great. Also what type of light are you running and where could I find it? Thanks. |
|
| Author: | BugginKJ [ Thu Jul 07, 2011 9:21 pm ] |
| Post subject: | Re: front turn signal mod |
scout wrote: Thanks for the reply. I figured it was easy and was thinking about using the JK turn signals. Im not sure if its a perfect fit but they look close. If you do add a picture that would be great. Also what type of light are you running and where could I find it? Thanks. I picked up the front LED's at harrisonspecialties.com and I did forget to mention ya have to wire in a resistor for the front turns so ya don't have a fast flash issue. I picked the resistors up at v-leds.com . I also looked at the JK's because where I used to work I had them on carhaulers just about everyday and I don't remember exactly why I didn't use them but I am sure fitment was the issue. I see what I can do about twisting Tom's arm to snap a pic or two and get them to ya.
|
|
| Author: | tommudd [ Thu Jul 07, 2011 10:04 pm ] |
| Post subject: | Re: front turn signal mod |
Dang the things I have to do for ............friends    
|
|
| Author: | BugginKJ [ Fri Jul 08, 2011 7:58 pm ] |
| Post subject: | Re: front turn signal mod |
 WOW I forgot you took those  That's right when I got the bumper done before it was remodded, painted rims and lift Thanks for postin the child years of the KJ 
|
|
| Author: | USAFCOP [ Thu Jul 14, 2011 12:01 am ] |
| Post subject: | Re: front turn signal mod |
Scout, you still at Carson, if so, just stop by Marty's and look at my wires on the front for the color matching, they are all still exposed. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|