LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

KJ Double Din Kit
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=62393		 Page 1 of 1
Author:  Supereco06 [ Fri Sep 02, 2011 11:10 am ]
Post subject:  KJ Double Din Kit
I was referred here by someone on Jeeps Unlimited that said my services may be of some benefit to the community.

I designed a dash panel for the WJ guys that allow them to install a Double Din radio into their vehicles without making permanent alterations to the dash boards of their vehicles. I was gauging to see what kind of interest there is for something similar in a KJ before I undertook the project. (no point in building it if no one wants it.)

Below are some images of the WJ kit I developed. Post your thoughts/opinions/questions here, and thanks in advance!

Image
Image
Image
Image
Image
Image
Image
Author:  RED_KJ_666 [ Fri Sep 02, 2011 5:11 pm ]
Post subject:  Re: KJ Double Din Kit
I'm in. What kind of cost would be associated with this product? Do you need one to Prototype off of :wink: ?
Author:  JeepinJarhead03 [ Sat Sep 03, 2011 1:02 am ]
Post subject:  Re: KJ Double Din Kit
I'd be interested in putting my 2m radio ontop of my regular 1din hu

i'd check to see if a 2din would fit (structurally) in the KJ's first , our stock hu's were 1.5din - I don't pay attention to A/v stuff to be honest

my guess is, that it would take more than a dash fascia to fit a 2din
Author:  liquidxit2 [ Sat Sep 03, 2011 10:59 am ]
Post subject:  Re: KJ Double Din Kit
Not to derail the thread but how much are the WJ kits and there are no modifications to the dash? Although I plan on keeping the stock radio for a while would be nice to put a more modern GPS in one day.
Author:  arengant [ Sat Sep 03, 2011 12:18 pm ]
Post subject:  Re: KJ Double Din Kit
JeepinJarhead03 wrote:
I'd be interested in putting my 2m radio ontop of my regular 1din hu

i'd check to see if a 2din would fit (structurally) in the KJ's first , our stock hu's were 1.5din - I don't pay attention to A/v stuff to be honest

my guess is, that it would take more than a dash fascia to fit a 2din


I believe a little work needs to be done to the HVAC ducts
Author:  tjkj2002 [ Sat Sep 03, 2011 8:57 pm ]
Post subject:  Re: KJ Double Din Kit
liquidxit2 wrote:
Not to derail the thread but how much are the WJ kits and there are no modifications to the dash? Although I plan on keeping the stock radio for a while would be nice to put a more modern GPS in one day.

I run a single DIN head unit and have a 7" screen and GPS,granted the GPS is a seperate unit but displays on head unit.I would require some modifying beyond just a face plate to fit a double DIN radio in a KJ.
Author:  infernicus [ Sat Sep 03, 2011 10:51 pm ]
Post subject:  Re: KJ Double Din Kit
viewtopic.php?f=45&t=39412
Author:  Supereco06 [ Sun Sep 04, 2011 11:08 pm ]
Post subject:  Re: KJ Double Din Kit
Apologies for not following up sooner, still moving into our new shop.

The WJ kits start at 100$ and go up from there, depending on finish, and come with the face plate and bracketry to get the new radio in. There is some subdash plastic that needs to be cut out but it is nothing structural and does not prevent you from re-installing the factory radio allowing you to switch back should you want/need to.

No modifications should be necessary to the HVAC in a WJ, and according to that thread none for the KJ either.

Even if we decide to not manufacture a full replacement like the WJ, at a minimum we can modify the KJ panels and provide brackets (should be able to use the brackets we are currently using in the WJ), so if someone is interested and would like to be a guinea pig send me a message and we can discuss the matter further.

Thanks for the input guys, I hope now that we are almost settled in here to get cracking on development of this!
Author:  jorgezee1 [ Mon Sep 26, 2011 11:53 pm ]
Post subject:  Re: KJ Double Din Kit
I know this thread is a bit old but any update on these? I am interested in a kit.

Thanks,
Jorge
Author:  lunch-box [ Tue Sep 27, 2011 1:53 pm ]
Post subject:  Re: KJ Double Din Kit
Me too!

Geoff
Author:  JL Rockies [ Wed Sep 28, 2011 10:41 am ]
Post subject:  Re: KJ Double Din Kit
Chalk this up to another "we found a dude whose gonna make bumpers for us" thread.
Author:  lunch-box [ Wed Sep 28, 2011 1:59 pm ]
Post subject:  Re: KJ Double Din Kit
Really... Bummer...
Author:  infernicus [ Wed Sep 28, 2011 4:59 pm ]
Post subject:  Re: KJ Double Din Kit
lunch-box wrote:
Really... Bummer...

Not necessarily.
He has an email in his signature. He probably doesn't check this forum too often.
Try sending him an email, I'm sure he will get back to you.
Author:  lakee911 [ Fri Oct 21, 2011 11:00 pm ]
Post subject:  Re: KJ Double Din Kit
I was just researching this today... I want one.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/