| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Well this is a first for me http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=63686 |
Page 1 of 2 |
| Author: | ShadowK99 [ Tue Nov 15, 2011 11:13 am ] |
| Post subject: | Well this is a first for me |
Last Sunday I decided to install my winter tires and guess what happened..... this is going to be fun......  IMG_0085 by shadowkeeper_99, on Flickr  IMG_0086 by shadowkeeper_99, on Flickr  IMG_0083 by shadowkeeper_99, on Flickr  IMG_0089 by shadowkeeper_99, on Flickr |
|
| Author: | riptricket [ Tue Nov 15, 2011 12:20 pm ] |
| Post subject: | Re: Well this is a first for me |
dam n that really does suck. I had a similar issue but it had enough on it so that hibdons could take it off still. btw who has purchased real lugnuts? I have heard mcgard is the best, and most expensive. |
|
| Author: | STINGN [ Tue Nov 15, 2011 12:29 pm ] |
| Post subject: | Re: Well this is a first for me |
mcguard is really good. i have them. real solid |
|
| Author: | riptricket [ Tue Nov 15, 2011 12:40 pm ] |
| Post subject: | Re: Well this is a first for me |
I am trying to figure out if black would look good on mine... http://www.mcgard.com/Applications/AutomotiveSearchHelpers/PhotoDetails.asp?lock=LugConeBulgeB.jpg&key= http://www.mcgard.com/Applications/AutomotiveSearch/default.aspx?QToK=XW995xtfFZLXHkt0ejBPTA%3d%3d |
|
| Author: | ShadowK99 [ Tue Nov 15, 2011 12:45 pm ] |
| Post subject: | Re: Well this is a first for me |
I'm going to replace my lug nuts with new chrome ones and put anti-seize on it all as soon as I can get what left of the old one off, I'm going to try my luck with this...  IMG_0090 by shadowkeeper_99, on Flickr |
|
| Author: | riptricket [ Tue Nov 15, 2011 1:09 pm ] |
| Post subject: | Re: Well this is a first for me |
that really does look like it will work, just don't go too deep. |
|
| Author: | gtommec [ Tue Nov 15, 2011 1:29 pm ] |
| Post subject: | Re: Well this is a first for me |
good luck with the holesaw...you're going to need it! That holesaw is not made for metal, not to mention how much of a PITA it is to use a holesaw without a pilot bit. |
|
| Author: | spitfire36o [ Tue Nov 15, 2011 1:59 pm ] |
| Post subject: | Re: Well this is a first for me |
i wouldn't try to cut or drill that out. To me that's a last resort. Soak it in pb blaster for a few days and weld a nut to it, then hit it with a torque gun. |
|
| Author: | ibHenry [ Tue Nov 15, 2011 2:33 pm ] |
| Post subject: | Re: Well this is a first for me |
ShadowK99 wrote: I'm going to replace my lug nuts with new chrome ones and put anti-seize on it all as soon as I can get what left of the old one off, I'm going to try my luck with this... IMG_0090 by shadowkeeper_99, on Flickr The hole saw will not work. Here is the deal, your are going to have to torch it off, or drill it out, if you are really patient then try a cold chisel and hammer. The torch is faster, if you know what your are doing, and I can't stress enough that you KNOW what your are doing. BTW is that a crack in your wheel I see on the one picture. 
|
|
| Author: | ShadowK99 [ Tue Nov 15, 2011 4:03 pm ] |
| Post subject: | Re: Well this is a first for me |
no the wheel isent cracked that's just WD40 that leaked down |
|
| Author: | ShadowK99 [ Tue Nov 15, 2011 4:16 pm ] |
| Post subject: | Re: Well this is a first for me |
gtommec wrote: good luck with the holesaw...you're going to need it! That holesaw is not made for metal, not to mention how much of a PITA it is to use a holesaw without a pilot bit. actualy its an H.S.S. bimetal holesaw so it is made for metal |
|
| Author: | ibHenry [ Tue Nov 15, 2011 4:31 pm ] |
| Post subject: | Re: Well this is a first for me |
ShadowK99 wrote: gtommec wrote: good luck with the holesaw...you're going to need it! That holesaw is not made for metal, not to mention how much of a PITA it is to use a holesaw without a pilot bit. actualy its an H.S.S. bimetal holesaw so it is made for metal Give it a shot, you are going to have to replace the stud no matter how you get it off.
|
|
| Author: | gtommec [ Tue Nov 15, 2011 4:36 pm ] |
| Post subject: | Re: Well this is a first for me |
ShadowK99 wrote: gtommec wrote: good luck with the holesaw...you're going to need it! That holesaw is not made for metal, not to mention how much of a PITA it is to use a holesaw without a pilot bit. actualy its an H.S.S. bimetal holesaw so it is made for metal somehow "that hard" got left out of my comment behind the word metal |
|
| Author: | ShadowK99 [ Tue Nov 15, 2011 4:51 pm ] |
| Post subject: | Re: Well this is a first for me |
gtommec wrote: ShadowK99 wrote: gtommec wrote: good luck with the holesaw...you're going to need it! That holesaw is not made for metal, not to mention how much of a PITA it is to use a holesaw without a pilot bit. actualy its an H.S.S. bimetal holesaw so it is made for metal somehow "that hard" got left out of my comment behind the word metal LOL OK I'm going to wait til the weekend to try this, worst case I have to torch the stud out and install a new one. best case I get lucky and it comes out nice and I can clean the thread on the existing stud... |
|
| Author: | m_volyrakis [ Tue Nov 15, 2011 8:02 pm ] |
| Post subject: | Re: Well this is a first for me |
Let us know how it went.. Good luck! |
|
| Author: | JL Rockies [ Wed Nov 16, 2011 12:31 pm ] |
| Post subject: | Re: Well this is a first for me |
PB is a waste of time. 50/50 acetone and ATF has been proven to be superior to anything you buy in stores... true story. |
|
| Author: | 501 [ Wed Nov 16, 2011 2:01 pm ] |
| Post subject: | Re: Well this is a first for me |
This happened to mine. I just bought a nut removal socket set and used that. The threads are reversed so when you start turning it to remove the bad nut it tightens on to the bad nut and removes it. |
|
| Author: | KTM87 [ Wed Nov 16, 2011 5:31 pm ] |
| Post subject: | Re: Well this is a first for me |
i this summer got some from advanced auto went from a 19mm up to a 21 mm open end seem alot nice hold my rime much more snugg and dont have to deal with those stupid alum caps they put on alot of lugs and after said and done think it came to be about 45 bucks, but i fugured its worth have my tires on my jeep and not passing me up on the road |
|
| Author: | peterepete [ Thu Nov 17, 2011 5:29 pm ] |
| Post subject: | Re: Well this is a first for me |
Mcgard is in a town ten mins away from my house. Been through the plant and everything. I would recommend them to anyone who is looking for a great replacement for oem lugnuts. They truly make a great product and stand by it. I use them on my lib. |
|
| Author: | ShadowK99 [ Sat Nov 19, 2011 7:24 pm ] |
| Post subject: | Re: Well this is a first for me |
OK so here is the update got it all dun, ended up shearing 2 more wheel nuts. The whole saw worked pretty well, I managed to save my studs but just to make sure i ran a tap on them to clean up the thread. I also put anti-seize and torqued them down with my torque wrench.  Brownsburg-Chatham-20111119-00052 by shadowkeeper_99, on Flickr  Brownsburg-Chatham-20111119-00053 by shadowkeeper_99, on Flickr  Brownsburg-Chatham-20111119-00057 by shadowkeeper_99, on Flickr  Brownsburg-Chatham-20111119-00056 by shadowkeeper_99, on Flickr |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
