LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Multifunction Switch - Headlight will not stay engaged
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=64095		 Page 1 of 1
Author:  jola [ Sun Dec 11, 2011 7:20 am ]
Post subject:  Multifunction Switch - Headlight will not stay engaged
Tonight while I was driving I discovered that my headlight will not stay engaged due to the multifunction switch not "clicking" into place and staying there. When I pull the stalk it won't stay. I looked at the parts diagram but the furthest Mopar breaks it down is to the multifunction switch. Is the switch not serviceable? I am thinking its just a clip or spring that is broken but does this mean I have to replace the whole unit to have a working headlight switch?
Author:  tjkj2002 [ Sun Dec 11, 2011 8:34 am ]
Post subject:  Re: Multifunction Switch - Headlight will not stay engaged
Yes just replace the whole thing.
Author:  jola [ Mon Dec 12, 2011 7:39 pm ]
Post subject:  Re: Multifunction Switch - Headlight will not stay engaged
I can only find this one on O'Reilly's site:

http://www.oreillyauto.com/site/c/detai ... ord=s14393

That is listed for 2002-2005 models. I have a 2007. Does anyone know if this will work? My other option is NAPA but that's $30 more. Options are limited in Alaska, heh.
Author:  Billwill [ Wed Dec 14, 2011 9:40 am ]
Post subject:  Re: Multifunction Switch - Headlight will not stay engaged
jola wrote:
I can only find this one on O'Reilly's site:

http://www.oreillyauto.com/site/c/detai ... ord=s14393

That is listed for 2002-2005 models. I have a 2007. Does anyone know if this will work? My other option is NAPA but that's $30 more. Options are limited in Alaska, heh.



I do not know about the 2007 model but you must be aware that there are two different types of multi-function switches...the one type is for a vehicle without front fog/driving lights and then a different switch for Jeeps with the fog/driving lights. :?
Author:  jola [ Thu Dec 15, 2011 5:41 am ]
Post subject:  Re: Multifunction Switch - Headlight will not stay engaged
Billwill wrote:
jola wrote:
I can only find this one on O'Reilly's site:

http://www.oreillyauto.com/site/c/detai ... ord=s14393

That is listed for 2002-2005 models. I have a 2007. Does anyone know if this will work? My other option is NAPA but that's $30 more. Options are limited in Alaska, heh.



I do not know about the 2007 model but you must be aware that there are two different types of multi-function switches...the one type is for a vehicle without front fog/driving lights and then a different switch for Jeeps with the fog/driving lights. :?

It is indeed something that I saw, and strangely enough more than one site listed the one without fog lights as more expensive. Either way, I am without fog lights unfortunately. Thanks Billwill.
Author:  Billwill [ Thu Dec 15, 2011 7:45 am ]
Post subject:  Re: Multifunction Switch - Headlight will not stay engaged
jola wrote:
Billwill wrote:
jola wrote:
I can only find this one on O'Reilly's site:

http://www.oreillyauto.com/site/c/detai ... ord=s14393

That is listed for 2002-2005 models. I have a 2007. Does anyone know if this will work? My other option is NAPA but that's $30 more. Options are limited in Alaska, heh.



I do not know about the 2007 model but you must be aware that there are two different types of multi-function switches...the one type is for a vehicle without front fog/driving lights and then a different switch for Jeeps with the fog/driving lights. :?

It is indeed something that I saw, and strangely enough more than one site listed the one without fog lights as more expensive. Either way, I am without fog lights unfortunately. Thanks Billwill.



I personaly believe that no harm would be caused by fitting the switch for fog lamps.(you pull out the end of the switch lever for fogs)....on a non-fog vehicle. Then it should be easy to add the missing relays and connect up fog lights to the wiring that is in place already....at least this applies to my 2002 Export model. :)
Author:  jola [ Thu Dec 15, 2011 7:36 pm ]
Post subject:  Re: Multifunction Switch - Headlight will not stay engaged
I'm very interested in this since I plan on purchasing fog lights in the near future.
Author:  infernicus [ Thu Dec 15, 2011 8:15 pm ]
Post subject:  Re: Multifunction Switch - Headlight will not stay engaged
jola wrote:
I'm very interested in this since I plan on purchasing fog lights in the near future.

If you plan on purchasing the MOPAR factory fog kit, it comes with the whole multi function switch. No point in spending extra money.

Here is a link to the kit. I'm not sure if that is the cheapest place to source the kit, that is just where I remember seeing the kit.
http://www.justforjeeps.com/foglights.html

Here is a PDF of the instal.
http://site.justforjeeps.com/guide/82209413.pdf


Good luck!
8)
Author:  jola [ Fri Dec 16, 2011 2:27 am ]
Post subject:  Re: Multifunction Switch - Headlight will not stay engaged
Sweet! Thanks!
Author:  infernicus [ Fri Dec 16, 2011 9:33 pm ]
Post subject:  Re: Multifunction Switch - Headlight will not stay engaged
No problemo!
Anything I can do to help!
8)
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/