I work at a Jeep dealership in parts. ask me anything
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| ask a dealership parts guy http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=65621 |
Page 1 of 2 |
| Author: | icecold1132 [ Sun Mar 04, 2012 4:59 pm ] |
| Post subject: | ask a dealership parts guy |
I work at a Jeep dealership in parts. ask me anything
|
|
| Author: | audiboy86 [ Sun Mar 04, 2012 5:11 pm ] |
| Post subject: | Re: ask a dealership parts guy |
Umm don't know how good of idea it is to advertise that but welcome all the same and enjoy our wealth of knowledge here. |
|
| Author: | Granahan378 [ Sun Mar 04, 2012 6:23 pm ] |
| Post subject: | Re: ask a dealership parts guy |
Ok, why is there such a huge variation between dealers on there pricing? How are your prices compared to others including online vendors.... For example a connecting rod assembly "top to bottom" for an 03 3.7? |
|
| Author: | ridenby [ Sun Mar 04, 2012 6:52 pm ] |
| Post subject: | Re: ask a dealership parts guy |
Do you receive training in being a punk or do they only hire punks for the job? |
|
| Author: | WolverineFW [ Sun Mar 04, 2012 9:07 pm ] |
| Post subject: | Re: ask a dealership parts guy |
Why is a Mopar part that says Made in Canada on the part cheaper for me to purchase from the stealership in the US and have shipped back to Canada than it is to buy from the Canadian stealership? |
|
| Author: | RENE [ Sun Mar 04, 2012 9:14 pm ] |
| Post subject: | Re: ask a dealership parts guy |
When he wrote ASK ME ANYTHING I am not sure he realised what he was asking for 
|
|
| Author: | icecold1132 [ Sun Mar 04, 2012 9:24 pm ] |
| Post subject: | Re: ask a dealership parts guy |
Depends on the price code they put in the quote. All dealers get everything for the same price from the same place. Dealer cost. Business is business and people need to make money at the end of work just as you all do . We don't make a ton of money but its livable |
|
| Author: | CIEJEK'S KJ [ Sun Mar 04, 2012 11:26 pm ] |
| Post subject: | Re: ask a dealership parts guy |
a 2002 4cyl gas front and rear axle, 4.10? price on both |
|
| Author: | tjkj2002 [ Sun Mar 04, 2012 11:31 pm ] |
| Post subject: | Re: ask a dealership parts guy |
CIEJEK'S KJ wrote: a 2002 4cyl gas front and rear axle, 4.10? price on both Better be sitting down for that price quote. |
|
| Author: | Sir Sam [ Sun Mar 04, 2012 11:43 pm ] |
| Post subject: | Re: ask a dealership parts guy |
CIEJEK'S KJ wrote: a 2002 4cyl gas front and rear axle, 4.10? price on both Why not just get the gears? |
|
| Author: | CIEJEK'S KJ [ Mon Mar 05, 2012 12:58 am ] |
| Post subject: | Re: ask a dealership parts guy |
front diff i have has a hair line crack, and i want to build a new set of axle to just straight swap in and have a back up set to swap back in incase one gives out also in my 06 i cant just swap in 4.10 unless iv read every post about it in here and when trying to buy a set they always say it wont fit in a 06 model |
|
| Author: | Sir Sam [ Mon Mar 05, 2012 1:20 am ] |
| Post subject: | Re: ask a dealership parts guy |
CIEJEK'S KJ wrote: front diff i have has a hair line crack, and i want to build a new set of axle to just straight swap in and have a back up set to swap back in incase one gives out also in my 06 i cant just swap in 4.10 unless iv read every post about it in here and when trying to buy a set they always say it wont fit in a 06 model I see several used 4.10 front diffs starting at $75-200 in the country. Perhaps a complete used unit is right for you? |
|
| Author: | JMSMN [ Mon Mar 05, 2012 1:40 am ] |
| Post subject: | Re: ask a dealership parts guy |
Where are the used 4.10 diffs at? Ill take one asap! |
|
| Author: | CIEJEK'S KJ [ Mon Mar 05, 2012 3:01 am ] |
| Post subject: | Re: ask a dealership parts guy |
Sir Sam wrote: CIEJEK'S KJ wrote: front diff i have has a hair line crack, and i want to build a new set of axle to just straight swap in and have a back up set to swap back in incase one gives out also in my 06 i cant just swap in 4.10 unless iv read every post about it in here and when trying to buy a set they always say it wont fit in a 06 model I see several used 4.10 front diffs starting at $75-200 in the country. Perhaps a complete used unit is right for you? find me some in va then hahahahah im looking everywhere and havent found any, please tell me where to look |
|
| Author: | CIEJEK'S KJ [ Mon Mar 05, 2012 3:03 am ] |
| Post subject: | Re: ask a dealership parts guy |
tjkj2002 wrote: CIEJEK'S KJ wrote: a 2002 4cyl gas front and rear axle, 4.10? price on both Better be sitting down for that price quote. money doesnt matter to me, i cant take it with me when i die so i might as well have fun with it, i know its going to cost a pretty penny, but its ok |
|
| Author: | Sir Sam [ Mon Mar 05, 2012 3:12 am ] |
| Post subject: | Re: ask a dealership parts guy |
CIEJEK'S KJ wrote: Sir Sam wrote: CIEJEK'S KJ wrote: front diff i have has a hair line crack, and i want to build a new set of axle to just straight swap in and have a back up set to swap back in incase one gives out also in my 06 i cant just swap in 4.10 unless iv read every post about it in here and when trying to buy a set they always say it wont fit in a 06 model I see several used 4.10 front diffs starting at $75-200 in the country. Perhaps a complete used unit is right for you? find me some in va then hahahahah im looking everywhere and havent found any, please tell me where to look car-part.com for the part select "carrier" and then 4.10. Be sure to input your zip code to get an idea of distance, though most places ship reasonably cost wise. |
|
| Author: | ibHenry [ Mon Mar 05, 2012 8:27 am ] |
| Post subject: | Re: ask a dealership parts guy |
What is the cheapest price that I can get for a Renegade light-bar?  
|
|
| Author: | teckman02 [ Mon Mar 05, 2012 4:15 pm ] |
| Post subject: | Re: ask a dealership parts guy |
ibHenry wrote: What is the cheapest price that I can get for a Renegade light-bar? 2x |
|
| Author: | norcalarctic [ Tue Mar 06, 2012 12:15 am ] |
| Post subject: | Re: ask a dealership parts guy |
ridenby wrote: Do you receive training in being a punk or do they only hire punks for the job?  maybe so in Kentucky but not out here in $ilicone Valley where the cost of living is through the roof and all the jobs went to Texas... one of the dealerships in San Jose has veteran parts guys that are helpful and hooked me up 10% above wholesale on skids and a receiver. I did not even buy my Jeep there, so I guess it all about individual dealerships that have the derelicts  For the  parts person, good to see another proud KJ owner, looking at it from the bright side of sunny California 
|
|
| Author: | icecold1132 [ Tue Mar 06, 2012 3:33 am ] |
| Post subject: | Re: ask a dealership parts guy |
ibHenry wrote: What is the cheapest price that I can get for a Renegade light-bar? depends on the year? of course i am not going to take responsibility of shipping a new OME light bar to you. But if you want to come in thats another story |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|