| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| How do you get the transfer case connector off the t.case s http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=65715 |
Page 1 of 1 |
| Author: | ahjjones [ Fri Mar 09, 2012 3:49 pm ] |
| Post subject: | How do you get the transfer case connector off the t.case s |
I'm in the process of changing the Transfer case switch and couldn't figure out how to release the connector that goes to the t.case switch. I see a tab but pulling it out does nothing to ease the release of the connector, and putting it inwards doesn't either. What's the correct way to get it off? |
|
| Author: | ahjjones [ Fri Mar 09, 2012 4:45 pm ] |
| Post subject: | Re: How do you get the transfer case connector off the t.cas |
Anyone know? I'm trying to get this finished sometime today. |
|
| Author: | kjon [ Fri Mar 09, 2012 9:00 pm ] |
| Post subject: | Re: How do you get the transfer case connector off the t.cas |
If you're talking about the cheap white plastic part connected to the end of the shift cable, it has a black rubber bushing inside that just slides onto/off of the selector pin. It should slide off from passenger side to drivers side. I think you just need need some more force. Mine kept popping off by itself, until I reengineered it  Edit... Never mind, you're talking about wiring connectors. Those things are a pain... |
|
| Author: | ahjjones [ Fri Mar 09, 2012 10:16 pm ] |
| Post subject: | Re: How do you get the transfer case connector off the t.cas |
kjon wrote: If you're talking about the cheap white plastic part connected to the end of the shift cable, it has a black rubber bushing inside that just slides onto/off of the selector pin. It should slide off from passenger side to drivers side. I think you just need need some more force. Mine kept popping off by itself, until I reengineered it Edit... Never mind, you're talking about wiring connectors. Those things are a pain... Yeah, it's the black connector cable that attaches to the transfer case switch/sensor. I couldn't get it off for anything! I pulled the tab and everything but it wouldn't budge. It's almost like it's seized. I'm not sure what to do at this point. 
|
|
| Author: | jhblackwell [ Fri Mar 09, 2012 11:23 pm ] |
| Post subject: | Re: How do you get the transfer case connector off the t.cas |
some of the connectors have a flat spot under the tab that you expose when you pull the tab back. Press on it firmly as you gently but firmly pull back on the connector. Good luck. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|