LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

U Joint Part n. rear propshaft
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=65776		 Page 1 of 1
Author:  Pippobug [ Tue Mar 13, 2012 2:01 pm ]
Post subject:  U Joint Part n. rear propshaft
Hi,

does anyone know what the part numbers is for the U Joint on the rear Propshaft for a 2002/3 KJ?
Mine is a CRD 2.5 but I would expect there would be no difference from a petrol.
Also does anyone know if there are greasable U Joint made for the KJ? if so where can I find them.

I am still trying to get rid of that vibartion I have under acceleration between 2000 rpm in 4th gear, I have changed all the rear A frame bushes, but it's still there a bit less, so I guess next have to be the U joints.

thank you,

Fil.
Author:  bugnout [ Tue Mar 13, 2012 6:01 pm ]
Post subject:  Re: U Joint Part n. rear propshaft
there are two different sizes, 3.622 and 3.219 outside lockup. No rhyme or reason why you would have one over the other.

I picked up a pair of the 3.622 figuring the larger one was for the diesel, but was wrong and had to make another trip to the parts store. They do make greasable u-joints in these sizes. readily available on this side of the pond.
Author:  Pippobug [ Wed Mar 14, 2012 11:49 am ]
Post subject:  Re: U Joint Part n. rear propshaft
Bugnout,

Would you know the correct part number required? I am interested in buying the greasable one, but here in the UK looks like i can't find them, do you have link to someone that would be able to supply them? Also how can I find out which is the one I need? 3.622 or 3.219

tks,
Fil.
Author:  bugnout [ Fri Mar 16, 2012 2:47 pm ]
Post subject:  Re: U Joint Part n. rear propshaft
I'll try to list some Manufacturers. Many of the parts stores relabel and use thier own part numbers

Image
Author:  Pippobug [ Sat Mar 17, 2012 4:30 am ]
Post subject:  Re: U Joint Part n. rear propshaft
Bugnout,

Thank you for the information. Out sheert luck I found them here in the UK and they are greasable. Now I have to see if they fit and it finally rersoves the vibartion I have between 18/2200 rpm under accelaration in 4th gear. If not I will be back asking for more help.

Fil.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/