Hi,

does anyone know what the part numbers is for the U Joint on the rear Propshaft for a 2002/3 KJ?
Mine is a CRD 2.5 but I would expect there would be no difference from a petrol.
Also does anyone know if there are greasable U Joint made for the KJ? if so where can I find them.

I am still trying to get rid of that vibartion I have under acceleration between 2000 rpm in 4th gear, I have changed all the rear A frame bushes, but it's still there a bit less, so I guess next have to be the U joints.

thank you,

Fil.

_________________
CRD 2.5 2003

Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators

there are two different sizes, 3.622 and 3.219 outside lockup. No rhyme or reason why you would have one over the other.

I picked up a pair of the 3.622 figuring the larger one was for the diesel, but was wrong and had to make another trip to the parts store. They do make greasable u-joints in these sizes. readily available on this side of the pond.

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.

Bugnout,

Would you know the correct part number required? I am interested in buying the greasable one, but here in the UK looks like i can't find them, do you have link to someone that would be able to supply them? Also how can I find out which is the one I need? 3.622 or 3.219

tks,
Fil.

_________________
CRD 2.5 2003

Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators

I'll try to list some Manufacturers. Many of the parts stores relabel and use thier own part numbers

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.

Bugnout,

Thank you for the information. Out sheert luck I found them here in the UK and they are greasable. Now I have to see if they fit and it finally rersoves the vibartion I have between 18/2200 rpm under accelaration in 4th gear. If not I will be back asking for more help.

Fil.

_________________
CRD 2.5 2003

Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators