LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

05 Renny bumper trimming
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=6600		 Page 1 of 1
Author:  4wdParakeet [ Sat Mar 11, 2006 8:39 pm ]
Post subject:  05 Renny bumper trimming
Well after the frankenlift I still had some rubbing on the 245/75/16 MT/R's.
It was catching the outside lugs on the drivers side of the rear air darn. Well I removed that, 7 rivets later, only to find my torn lower facsia was way to flimsy so I ended up taking the middle section out and "stitching the torn part of the facsia together by drilling holes and zip-tieing the crap out of it. Now the only part that catches is the upper control arm and right by the washer fluid bottle. The only issue I see is now my radiator support, a/c lines and wiring harness is fairly exposed. I need a skid plate that mounts to the mopar skid and to the underside of the bumper support. I'll get some good pics when I go wheeling tomorrow.


Parakeet
Author:  4wdParakeet [ Fri Mar 31, 2006 1:46 am ]
Post subject: 
sorry it took so long to post the pics of the trim job. I just got my camera so I had to try it out. I really like the way it looks with out all the plastic blocking the view of the suspension. I also had torn the facia on one of my outings. After I took the middle piece was removed it hung down and was jiggly as heck. So if figured w/ it being Frankenlifted it needed stitches. I'm going to have a guy make me a skid for the front now that will go from the stock skid to the tow hooks. Image
Image
Image


Parakeet
Author:  valvestem [ Fri Mar 31, 2006 2:25 am ]
Post subject:  Yep
Yep, that looks great. I like the more "mechanical" look too.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/