LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Keeping it just the same
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=66214		 Page 1 of 1
Author:  Teach [ Tue Apr 03, 2012 12:02 pm ]
Post subject:  Keeping it just the same
I'm fairly new to the whole Jeep community. In the past I owned a couple of small trucks, but with the addition of my two children, they quickly became too small. I traded in My z71 4x4 Chevy Colorado for a 2003 Renegade 4x4. At first, I planned on moding it some. Now that notition has changed. I have simply fallen in love with the Renegade, and want to keep it as factory as possible. Anyone else in the same boat?

The Renegade I have has 105k miles on it. It needs some work to it. It has several scratches a dent and rust spot above the rear glass. I also need to get new Jeep emblems for the tail gate and hood. The tube steps will also need some work. The interior is in pretty good shape, other than a couple of small holes in the leather. The drive train is in good shape and runs strong.

I would also like to find a 95/96 Grand Cherokee Orvis Edition in the future and work on restoring that as well.

Anyone else have simlar ideas or plans?
Author:  fratichelli [ Tue Apr 03, 2012 12:59 pm ]
Post subject:  Re: Keeping it just the same
Mine is stock. It is a limited, so it already has plenty of bells and whistles.

One thing I do want to do is put a lift on it. I have heard the ride is better lifted than stock. The limited experience I have had in lifted libertys makes me think they are right.

Other than that, I think I will upgrade some of the parts that are prone to failure, i.e. I am going to replace my brake lines with the longer ones. They are braided steel over rubber, so they should be better than stock.

I am not big into modding out my cars anyway, mostly because of money constraints.
Author:  tommudd [ Tue Apr 03, 2012 1:17 pm ]
Post subject:  Re: Keeping it just the same
A vehicle that is stock is just like a blank canvas waiting for the artist to apply his or her own colors to it.
The KJ I kept stock longer than any others I have ever had.
And that lasted about a week.

At 105,000 you have to at least upgrade the suspension
It has to be dragging the ground by now :wink:
Author:  Teach [ Tue Apr 03, 2012 1:20 pm ]
Post subject:  Re: Keeping it just the same
Good tips. I have looked at the small OME lift from RRO. I like OME, and do not want a huge lift on it. I know that I will need some new springs soon. Mine are sagging pretty badly.

Overall I want to keep it mostly stock. After all it will be used mostly on the road.
Author:  bgcarl01 [ Tue Apr 03, 2012 1:42 pm ]
Post subject:  Re: Keeping it just the same
I planned on keeping it mostly stock, just adding some skid plates, cuz somebody didn't order it with them! Anyway, now with gas prices looming over 4.00 again, and the stock suspension dragging the ground for sure, (CV's point up instead of down now.) I am being torn apart by weighing the options of lifting with straight up OME, no additions, or just buying stock components, especially since I don't want to put on larger tires. If it rides fine for ya, keep it the way it is :lol:
Just know that the longer you spend on a site like this, your gonna want to do stuff to it!
Author:  tommudd [ Tue Apr 03, 2012 1:51 pm ]
Post subject:  Re: Keeping it just the same
Teach wrote:
Good tips. I have looked at the small OME lift from RRO. I like OME, and do not want a huge lift on it. I know that I will need some new springs soon. Mine are sagging pretty badly.

Overall I want to keep it mostly stock. After all it will be used mostly on the road.


Way better places to look than RRO :furious:
look at jeepinbyal or AllJs
Even on road with upgraded springs/shocks it will ride way better than it ever did stock
Author:  fratichelli [ Tue Apr 03, 2012 2:30 pm ]
Post subject:  Re: Keeping it just the same
tommudd wrote:
A vehicle that is stock is just like a blank canvas waiting for the artist to apply his or her own colors to it.
The KJ I kept stock longer than any others I have ever had.
And that lasted about a week.

At 105,000 you have to at least upgrade the suspension
It has to be dragging the ground by now :wink:



Mine has 160K now with 18.5" on the front and 19.5 on the back, measured from the center of the wheel to the fender.

Of course, the last guy who had it kept it in pretty good shape. He might have had OEM springs put in.
Author:  tommudd [ Tue Apr 03, 2012 2:51 pm ]
Post subject:  Re: Keeping it just the same
Pretty typical almost an inch lower than stock height
I've lifted some that were an inch lower at 85-90,000
Author:  Teach [ Tue Apr 03, 2012 4:05 pm ]
Post subject:  Re: Keeping it just the same
I probably will do the OME small lift for the better ride, and getting the sag out, but other than that I think I might keep it stock. I did quite a bit to my Colly over the last few years. It was fun, but since I got this used I think I might bring it back to its original glory or close to it.
Author:  tommudd [ Tue Apr 03, 2012 5:00 pm ]
Post subject:  Re: Keeping it just the same
I have an issue with stock vehicles
no matter what I have to do something to them :ROTFL:
The KJ I bought just to drive, swore I would never do anything to it, due to it being a daily driver that I had to use on the job ( at that time) so wasn't going to go crazy like I had the last 100 or so :banghead: :dizzy: :furious: :JEEPIN:
Author:  jola [ Tue Apr 03, 2012 6:00 pm ]
Post subject:  Re: Keeping it just the same
I'm keeping mine stock, though I'll try to upgrade here and there when parts break. I bought my Jeep as a reliable vehicle to road trip with, take me to hiking trailheads (in Alaska that can mean 4x4 required), and pack up all my necessities when I move (which is on a semi-regular basis these days). It has been great for all of those things.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/