how do you find the sensour frequenices of the system ????
I'm lost ???
Thanks
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Tire pressure monitor system. Help http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=66627 |
Page 1 of 1 |
| Author: | bod [ Thu Apr 26, 2012 12:26 pm ] |
| Post subject: | Tire pressure monitor system. Help |
how do you find the sensour frequenices of the system ???? I'm lost ??? Thanks
|
|
| Author: | papaindigo [ Thu Apr 26, 2012 1:51 pm ] |
| Post subject: | Re: Tire pressure monitor system. Help |
There are 2 frequency ranges 434 MHz in Europe and 315 MHz most everywhere else. I don't have a clue which you would have in the UK or if it matters. I can tell you the 2006 parts manual distinguishes between US and export tire sensors but I can also tell you that at least some vehicles, don't know about Jeep, have receivers that work with either frequency. |
|
| Author: | bod [ Sat May 19, 2012 6:39 pm ] |
| Post subject: | Re: Tire pressure monitor system. Help |
Thank you very much for the help on this. It a pain in the booty. putting salt on the road, i've never had a problem with snow or ice when in 4 wheel drive  once again thanks. Alan. |
|
| Author: | bod [ Thu May 24, 2012 3:00 pm ] |
| Post subject: | Re: Tire pressure monitor system. Help |
Big thank you Papaindigo  Found a repair kit on the bay Item number: 280875683133  saved me a kings ransom It's bloody tipical they are made in the UK and 4 times the price. |
|
| Author: | bod [ Thu Aug 02, 2012 9:22 am ] |
| Post subject: | Re: Tire pressure monitor system. Help |
Should have posted this sooner, but just to update. the repair kit was fine but getting the old ones out was a real pian in the arse and the time it took. the only problem i had was the length of the new stems could do with being a 1/2 inch longer (in new money 13mm). Had to cut the old stem off with a chisel then transfered the old sensor to the new stem. If anybody wants a idiots guide to it pm me and i'll sent it by email. Just to say thank you to those of you that helped. ATB Alan. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|