LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Look what I just got!
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=6785		 Page 1 of 1
Author:  4wdParakeet [ Fri Mar 17, 2006 1:02 am ]
Post subject:  Look what I just got!
I just ordered one for 63 bucks shipped. Says it will hold 200lbs and weighs less than 20 lbs. I'll keep you posted on how it looks and such.

http://www.overstock.com/cgi-bin/d2.cgi ... id=1732464


Parakeet[/list]
Author:  desertkj [ Fri Mar 17, 2006 9:40 am ]
Post subject: 
I'm curious as well. Keep us updated.
Author:  LibertyCRD [ Fri Mar 17, 2006 9:43 am ]
Post subject: 
Just got mine this week. Putting it on tomorrow. It's AWESOME looking...exactly what I wanted. And for $62 bucks...shipped to the door, who can beat it??
Author:  Ron [ Fri Mar 17, 2006 12:21 pm ]
Post subject: 
I just got the wife's mounted and they do look pretty good. It's a little lighter duty than I expected but for the price you can't beat it...I think have a couiple of pics posted see the Jeep.
Author:  Jinxman [ Fri Mar 17, 2006 2:39 pm ]
Post subject: 
How do you plan to mount that to the oversize roof rails on the renegade?
Author:  pixeldzn [ Fri Mar 17, 2006 2:43 pm ]
Post subject: 
Jinxman wrote:
How do you plan to mount that to the oversize roof rails on the renegade?


I bought the same one and tried to mount it with u-bolts. No workie. I ended up buying the Jeep crossrails and it works perfect. $146 at jparts.com
Author:  EugeneTheJeep06 [ Fri Mar 17, 2006 2:48 pm ]
Post subject: 
Ron wrote:
I just got the wife's mounted and they do look pretty good. It's a little lighter duty than I expected but for the price you can't beat it...I think have a couiple of pics posted see the Jeep.


Did it come with the mounting hardware and do you have to have the factory cross rails to mount it ?
Author:  LibertyCRD [ Fri Mar 17, 2006 2:51 pm ]
Post subject: 
The basket does come with hardware to mount it.

But you do need crossrails to run between your siderails first. www.prolineracks.com sells crossrails for HALF the price of Mopar, Yakima, etc.

I'm going to try and fabricate some of my own cross rails tomorrow. To me, having to spend $150.00 on cross rails would ruin the great deal I got on the basket.

Then my next project will be how on earth to mount off-road lights to the basket, and how to run a CB antenna wire inside the cab from the basket.
Author:  EugeneTheJeep06 [ Fri Mar 17, 2006 2:57 pm ]
Post subject: 
LibertyCRD wrote:
I'm going to try and fabricate some of my own cross rails tomorrow. To me, having to spend $150.00 on cross rails would ruin the great deal I got on the basket.



Let us know how that works out for you.
Author:  LibertyCRD [ Fri Mar 17, 2006 3:19 pm ]
Post subject: 
http://www.kchilites.com/store/ATV-Brac ... 1C122.aspx

These brackets might work for installing lights to this basket. 8)

If I can't fab up any cross bars I'm going to just buy the prolineracks.com crossbars for $69.95. Then I'll still have less money in my basket and crossbars than some of these guys have in just crossbars alone. :wink:
Author:  4wdParakeet [ Fri Mar 17, 2006 7:51 pm ]
Post subject: 
I'm still waiting for it too get here so I don't know how I'm going to mount it. I'm sure I can figure something out. Besides I have the connections at the dealership. I got the Mopar hitch for my KJ for 75.00. So we'll see when it gets here.


Parakeet
Author:  tommudd [ Sat Mar 18, 2006 12:46 pm ]
Post subject: 
To mount it just run some flat steel stock across attached with u-bolts on either end or do like I did and drill trough the main bars and run 3/4 inch all thread sits it down lower to the roof. I hate to see those that are 6/7 inches above the roof. Mine was simple, cheap and it works and I can stand on top of it so it will hold all my gear. Have with the basket maybe 75 total plus my own time
Author:  vxla [ Sat Mar 18, 2006 5:29 pm ]
Post subject: 
Come on stop teasing!

Grr, stupid thing.

WE NEED PICS! :)
Author:  RaeRae1616 [ Sat Mar 18, 2006 8:17 pm ]
Post subject: 
tommudd wrote:
To mount it just run some flat steel stock across attached with u-bolts on either end or do like I did and drill trough the main bars and run 3/4 inch all thread sits it down lower to the roof. I hate to see those that are 6/7 inches above the roof. Mine was simple, cheap and it works and I can stand on top of it so it will hold all my gear. Have with the basket maybe 75 total plus my own time


If you can post some pics that would be awesome . . . especially if it's lower to the roof . . . my biggest concerns are for clearance!

Thanks!
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/