| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| ABS Sensor http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=6796 |
Page 1 of 1 |
| Author: | uvalax236 [ Fri Mar 17, 2006 1:29 pm ] |
| Post subject: | ABS Sensor |
Can anyone post a pic. of where the ABS sensors are? My ABS light came on and its bothering me. I know I gotta clean em but I have no idea where they are. Thanks for the help! |
|
| Author: | Jeepjeepster [ Fri Mar 17, 2006 2:00 pm ] |
| Post subject: | |
Depening on the year, I believe the rear uses the abs sensor on top of the pumpkin, so you cant clean that. The front sensors should be on the hubs/ steering knuckle. |
|
| Author: | uvalax236 [ Fri Mar 17, 2006 2:13 pm ] |
| Post subject: | |
Alright I will clean the pumkin. Any idea where on the Steering Knuckle/Hub? |
|
| Author: | Jeepjeepster [ Fri Mar 17, 2006 3:19 pm ] |
| Post subject: | |
Well, Im not to sure where it would be since my jeep doesnt have abs. On our grand it looks like this. 
This is on a SFA though. It should have some teeth like that and a sensor really close to them. Sometimes dirt gets inbetween the teeth and the sensor. There is nothing to clean on the rear pumpkin, check to make sure the wires going into the top of it are in good shape though. |
|
| Author: | winkelhawk [ Sat Mar 18, 2006 7:06 am ] |
| Post subject: | |
It is just under the rotor on the top of the knuckle. Just follow the black line the goes over the bumpstop down to the knuckle. I had a replace mine a few months ago, the ABS line got crushed between the spring and the bumpstop. If you need to replace it, they are about $35. I'll warn you, mine broke while taking it out. The o-ring seized in the knuckle and broke the mounting tab right off. I was suprised to see how clean it was when I finally got the sensor out. |
|
| Author: | Libby4Wheeler [ Sat Mar 18, 2006 12:18 pm ] |
| Post subject: | |
this top pic http://www.lostjeeps.com/forum/phpBB3/vie ... php?t=4348 it goes in the actual bearing hub itself i know i have been looking for one from a wrecking yard for almost a year i cannot afford the $475 they want for it through dealer schucks autozone etc. |
|
| Author: | Jeepjeepster [ Sat Mar 18, 2006 12:43 pm ] |
| Post subject: | |
Thats crazy, the sensor goes into the knuckle. Kinda cool, can it even get dirty? |
|
| Author: | Libby4Wheeler [ Tue Mar 21, 2006 6:37 pm ] |
| Post subject: | |
even though my bearing was fried when i tookthe sensor out it was very clean and i have had that thing submerged in water and mud not even wet in there except like what grease and stuff that would be in there for the bearing. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|