I noticed on my newly purchased '07 KJ that one of these is missing.

I was wondering if anyone knew the specs on the bolt so I can replace it, or if I should just remove the other one while at a hardware store to try to find a match, or should I just go to the dealer?

Thanks

_________________
06 KJ LTD 4x4 - 245/65/17 Discoverer AT3's, OME 927/948, HyperTech, Thrush Welded, 5% tint, DIY Fence post crossbars, fog/high beam mod, C3 Hitch, cut bumper, pinch welds..

Future: cargo roof basket, recovery points, skids..
"...to disarm the people - that was the best and most effectual way to enslave them." - George Mason

If it was up to me I would just pull the other bolt or one from the passenger side so that you can get an exact match. A hardware store will probably be easier and cheaper then the dealership. Fastenal is good but most of what they sell is in packages but they can get you dimensions exactly and write them down for you and you can go somewhere like Lowe's or Tractor Supply...I do it all the time this way haha. Not sure what all you have nearby and sorry idk the dimensions myself. Hope I was a little bit of help at least.

_________________
04 White KJ, OME 927 & 948 with 3 conduit nuts, JBA UCA's with disconnects, Bilstein shocks, 265 70 16 Cooper AT3, Level 8 ZX wheels with scratch guard

Thats a pretty good idea. Didn't even think of that. Thanks.

_________________
06 KJ LTD 4x4 - 245/65/17 Discoverer AT3's, OME 927/948, HyperTech, Thrush Welded, 5% tint, DIY Fence post crossbars, fog/high beam mod, C3 Hitch, cut bumper, pinch welds..

Future: cargo roof basket, recovery points, skids..
"...to disarm the people - that was the best and most effectual way to enslave them." - George Mason

You're welcome. Let me know how it works out

_________________
04 White KJ, OME 927 & 948 with 3 conduit nuts, JBA UCA's with disconnects, Bilstein shocks, 265 70 16 Cooper AT3, Level 8 ZX wheels with scratch guard