ok on the liberty if i go to unlock the doors with my remote or the dook lock button on the doors the doors will lock but not unlock. the only doors that WILL lock and unlock the way they should are the drivers door and the back cargo door i have also checked all of my settings on my EVIC

_________________
With enough fabbing, time & $, it's certainly possible.
That being said, it's like boinkin' your sister...just because you can, doesn't mean you should.

its ruined.

_________________
Steve
2018 RAM 1500 Rebel
2003 KJ
Mods:Exterior: Frankenlift + 2 extra rear iso, JBA UCAs, ARB Bumper w/XRC8, Safari Snorkel, 265/75/16 AT, Mopar Skids, Boulderbars, RL Gecko Sport Rack
Interior: Infinity Reference speakers, 12" Alpine Type R Sub, Alpine radio, Gauge Pods (Oil, Volts), Cobra Cb, All J Interior Rack

How long since you changed the battery on the key fob?....does weird things when low

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur

Nick your post just confused me.
Lol

I would check fuses. Sometimes a bad fuse will do that. Not sure if a fuse is linked to the doors locking/unlocking, but it's a place to start.
Also I'd replace the the battery in the key fob. If that doesn't work, there is something internally wrong. Such as wiring. That is my guess/suggestions.

_________________
Doorless Liberty Instructions
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=59612&p=739557#p739557

I just fixed this problem in mine. Take the fob apart and gently take the green micro board all the way out so that you see the back of the buttons. If you look closely you should see that there is a small adhesive "safety shield" that has probably slipped down over the contact point on the back of the fob.


*Edit* I definitely did not read the post and just thought I knew what it said. I believe this is NOT the solution.

_________________
Pastafari Alum